We figure 768 gives us two more years and we are replacing the boxes at the 
core as fast as possible.
Those that are using SRD feature, we can tune tables and still provide clients 
with a full table.
These devices generally only have two paths to the core anyway and don't
Directly connect to the internet.


Mack McBride | Senior Network Architect | ViaWest, Inc.
O: 720.891.2502 | C: 303.720.2711 | [email protected] | www.viawest.com


-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of James 
Jun
Sent: Thursday, July 07, 2016 9:08 AM
To: Howard Leadmon
Cc: 'cisco-nsp'
Subject: Re: [c-nsp] SUP720's memory, looking at options..

On Thu, Jul 07, 2016 at 12:20:47AM -0400, Howard Leadmon wrote:
>
> Has anybody come up with a good guess as to what is a good division of the 
> TCAM for BGP routing?    I have had mine at 640K for IPv4 for a while, but 
> looking at the v4 to v6 ratios, I am thinking maybe 768 for v4 may be a 
> better guess..
>
>

Yes, we use the following on 7600/6500 platforms:

mls cef maximum-routes ipv6 90
mls cef maximum-routes ip-multicast 1

This should allocate most of your TCAM into IPv4/MPLS -- 832k for IPv4 + MPLS, 
90k for IPv6, 1k for multicast.


James
_______________________________________________
cisco-nsp mailing list  [email protected] 
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
This message contains information that may be confidential, privileged or 
otherwise protected by law from disclosure. It is intended for the exclusive 
use of the addressee(s). Unless you are the addressee or authorized agent of 
the addressee, you may not review, copy, distribute or disclose to anyone the 
message or any information contained within. If you have received this message 
in error, please contact the sender by electronic reply and immediately delete 
all copies of the message.
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to