On Mon, November 28, 2016 20:54, Gregor Jeker wrote: > Hi Guys > We have also been working with a demo pair of those, intended as CPE for > some E-Line like services. From my side, I have never seen that weird CLI > everyone is talking about, I just started with the console and had a very > IOS-like CLI. I got the devices from the demo pool, so maybe someone > before hit some magic command, or maybe it depends on the set of > credentials or the firmware? I used admin/sandino, the software in use is: > > ME1200-1# sh ver > [...] > Active Image > ------------ > Image : me1200-universal-mz.156-2.SN.dat (primary) > Version : ME1200 OS Software Build 15.4-3.SN > > ME1200-1# show inventory > NAME: "ME1200", DESCR: "Network Interface Device" > PID: ME1200-4S-A , VID: V01 , SN: RTC1XXXXXXXX > > Just to give you some examples of what I am seeing with this device: > > ME1200-1# sh run int gig 1/1 > Building configuration... > interface GigabitEthernet 1/1 > switchport hybrid native vlan 100
Wow that's weird. Why do you get the iCLI and I get this crapy shell? Our Image is me1200-universal-mz.156-2.SN which is the same as yours. But our OS Version is different, we have "OS Software Build 15.6-2.SN" (same as the Image). And I also use the admin/sandino default priv 15 user.. > Some commands and especially the show outputs are a little different than > traditional IOS. However, no problems getting things up&running. It would be very happy with a shell like yours :) But how to get it? > Cheers, > Gregor Cheers, Holger _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
