Hello Paul On Thu, December 8, 2016 10:36, Williams, Paul wrote: > Log in to the default shell, and then enter: > v i e > v i v
WTF, this Cheatcode works! I got into iCLI now. Thank you Paul! Best regards Holger > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 6 Dec 2016 23:37:34 +0000 > From: Erik Sundberg <[email protected]> > To: Holger L <[email protected]>, Gregor Jeker > <[email protected]> > Cc: cisco-nsp <[email protected]> > Subject: Re: [c-nsp] Cisco ME1200 iCLI > Message-ID: > <[email protected]> > Content-Type: text/plain; charset="utf-8" > > I was never able to get the iCLI work always was stuck in the awkward > shell, or GUI. When talking to our cisco SE, he really wasn't familiar > with it. We didn't spend a lot of time on it and moved on to the next > project. > > If someone could share how to change the device from a Shell like to iCLI, > that would be appreciated. > > -----Original Message----- > From: Holger L [mailto:[email protected]] > Sent: Tuesday, November 29, 2016 7:20 AM > To: Gregor Jeker > Cc: Erik Sundberg; cisco-nsp > Subject: Re: [c-nsp] Cisco ME1200 iCLI > > On Mon, November 28, 2016 20:54, Gregor Jeker wrote: >> Hi Guys >> We have also been working with a demo pair of those, intended as CPE >> for some E-Line like services. From my side, I have never seen that >> weird CLI everyone is talking about, I just started with the console >> and had a very IOS-like CLI. I got the devices from the demo pool, so >> maybe someone before hit some magic command, or maybe it depends on >> the set of credentials or the firmware? I used admin/sandino, the >> software in use is: >> >> ME1200-1# sh ver >> [...] >> Active Image >> ------------ >> Image : me1200-universal-mz.156-2.SN.dat (primary) >> Version : ME1200 OS Software Build 15.4-3.SN >> >> ME1200-1# show inventory >> NAME: "ME1200", DESCR: "Network Interface Device" >> PID: ME1200-4S-A , VID: V01 , SN: RTC1XXXXXXXX >> >> Just to give you some examples of what I am seeing with this device: >> >> ME1200-1# sh run int gig 1/1 >> Building configuration... >> interface GigabitEthernet 1/1 >> switchport hybrid native vlan 100 > > Wow that's weird. Why do you get the iCLI and I get this crapy shell? Our > Image is me1200-universal-mz.156-2.SN which is the same as yours. But our > OS Version is different, we have "OS Software Build 15.6-2.SN" (same as > the Image). And I also use the admin/sandino default priv 15 user.. > >> Some commands and especially the show outputs are a little different >> than traditional IOS. However, no problems getting things up&running. > > It would be very happy with a shell like yours :) But how to get it? > >> Cheers, >> Gregor > > Cheers, > Holger > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
