We had this same issue, and raised a TAC case. Eventually we managed to get through to an ME1200 expert, who gave us some hidden commands to enter. Log in to the default shell, and then enter: v i e v i v (note there's a space between each letter, hit enter after each line) That got us to the iCLI interface, so hopefully it will work for you too.
I believe the newer images for this device drop into a normal IOS by default. Regards Paul W ---------------------------------------------------------------------- Message: 1 Date: Tue, 6 Dec 2016 23:37:34 +0000 From: Erik Sundberg <[email protected]> To: Holger L <[email protected]>, Gregor Jeker <[email protected]> Cc: cisco-nsp <[email protected]> Subject: Re: [c-nsp] Cisco ME1200 iCLI Message-ID: <[email protected]> Content-Type: text/plain; charset="utf-8" I was never able to get the iCLI work always was stuck in the awkward shell, or GUI. When talking to our cisco SE, he really wasn't familiar with it. We didn't spend a lot of time on it and moved on to the next project. If someone could share how to change the device from a Shell like to iCLI, that would be appreciated. -----Original Message----- From: Holger L [mailto:[email protected]] Sent: Tuesday, November 29, 2016 7:20 AM To: Gregor Jeker Cc: Erik Sundberg; cisco-nsp Subject: Re: [c-nsp] Cisco ME1200 iCLI On Mon, November 28, 2016 20:54, Gregor Jeker wrote: > Hi Guys > We have also been working with a demo pair of those, intended as CPE > for some E-Line like services. From my side, I have never seen that > weird CLI everyone is talking about, I just started with the console > and had a very IOS-like CLI. I got the devices from the demo pool, so > maybe someone before hit some magic command, or maybe it depends on > the set of credentials or the firmware? I used admin/sandino, the software in > use is: > > ME1200-1# sh ver > [...] > Active Image > ------------ > Image : me1200-universal-mz.156-2.SN.dat (primary) > Version : ME1200 OS Software Build 15.4-3.SN > > ME1200-1# show inventory > NAME: "ME1200", DESCR: "Network Interface Device" > PID: ME1200-4S-A , VID: V01 , SN: RTC1XXXXXXXX > > Just to give you some examples of what I am seeing with this device: > > ME1200-1# sh run int gig 1/1 > Building configuration... > interface GigabitEthernet 1/1 > switchport hybrid native vlan 100 Wow that's weird. Why do you get the iCLI and I get this crapy shell? Our Image is me1200-universal-mz.156-2.SN which is the same as yours. But our OS Version is different, we have "OS Software Build 15.6-2.SN" (same as the Image). And I also use the admin/sandino default priv 15 user.. > Some commands and especially the show outputs are a little different > than traditional IOS. However, no problems getting things up&running. It would be very happy with a shell like yours :) But how to get it? > Cheers, > Gregor Cheers, Holger _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
