Just put each ISP on their own sub-interface.
(Not sure why in the world you would have two different, unrelated
connections on the same sub-interface.)
--
Jerry Bacon
Senior Network Engineer
StarTouch, Inc.
http://www.startouch.com
360-543-5679 ext. 111
Microwave - Fiber Optics - Internet Services
On 3/6/2017 7:42 AM, Martin T wrote:
I have a Cisco ISR G2 router with following sub-interface configuration:
!
interface GigabitEthernet0/0.123
encapsulation dot1Q 123
ip address 10.10.10.58 255.255.255.254 secondary
ip address 192.168.1.42 255.255.255.254
end
10.10.10.58/31 is connection to ISP-1 and 192.168.1.42/31 is
connection to ISP-2. I need to count the bandwidth over SNMP for both
connections separately. My first thought was to configure an ACL for
traffic accounting purposes, but looks like ISR routers are not able
to return ACL statistics over SNMP.
Is it possible to monitor primary and secondary IP address traffic
separately over SNMP?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
