Rolf Hanßen wrote: > I just tried to get VRRP + IPv6 running on a Sup2T with 15.1(2)SY1. > I enabled VRRPv3 and it works at least for IPv4.
Yeah, this caught me too. The primary ipv6 address for a vrrpv3 needs to be an ipv6 link-local address: > http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/15-mt/fhp-15-mt-book/fhrp-vrrpv3.html > VRRPv3 for IPv6 requires that a primary virtual link-local IPv6 > address is configured to allow the group to operate. After the > primary link-local IPv6 address is established on the group, you can > add the secondary global addresses. So your configuration should look like this: fhrp version vrrp v3 interface Vlan2000 vrrp 6 address-family ipv6 address fe80::1 primary address xxxx:xxxx:xxxx:xxxx::1/64 exit-vrrp end Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
