Hi Nick, yes, that's it. Comes up now, thanks for the hint.
kind regards Rolf > Rolf Hanßen wrote: >> I just tried to get VRRP + IPv6 running on a Sup2T with 15.1(2)SY1. >> I enabled VRRPv3 and it works at least for IPv4. > > Yeah, this caught me too. The primary ipv6 address for a vrrpv3 needs > to be an ipv6 link-local address: > >> http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/15-mt/fhp-15-mt-book/fhrp-vrrpv3.html > >> VRRPv3 for IPv6 requires that a primary virtual link-local IPv6 >> address is configured to allow the group to operate. After the >> primary link-local IPv6 address is established on the group, you can >> add the secondary global addresses. > > So your configuration should look like this: > > fhrp version vrrp v3 > interface Vlan2000 > vrrp 6 address-family ipv6 > address fe80::1 primary > address xxxx:xxxx:xxxx:xxxx::1/64 > exit-vrrp > end > > Nick _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/