That fixed it, thanks! Downside is that the call doesn't disconnect when the remote disconnects.... added limit-media-detection and it appears to not be any better...
J On Wed, Apr 30, 2014 at 3:25 PM, Jonathan Charles <[email protected]> wrote: > Made the changes; will need to schedule maintenance to test. > > > On Wed, Apr 30, 2014 at 9:30 AM, Brian Meade <[email protected]> wrote: > >> Since you're using H.323, you need to set "Allow Peer to Preserve H.323 >> Calls" to "True" under Service Parameters->Cisco CallManager. >> >> Brian >> >> >> On Tue, Apr 29, 2014 at 11:16 PM, Jonathan Charles <[email protected]>wrote: >> >>> We have no hard phones; however, Cisco IP Communicator also drops the >>> call during a CCM failover... >>> >>> >>> Jonathan >>> >>> >>> On Tue, Apr 29, 2014 at 10:08 AM, Brian Meade <[email protected]> wrote: >>> >>>> Jonathan, >>>> >>>> Have you tested the call preservation on a hard phone and confirmed >>>> that is working okay first? >>>> >>>> Brian >>>> >>>> >>>> On Tue, Apr 29, 2014 at 10:28 AM, Jonathan Charles >>>> <[email protected]>wrote: >>>> >>>>> We have CUCM 9.1, IM&P 9 and Jabber 9.6 connected to IM and P as >>>>> softphones... >>>>> >>>>> Call Preservation is not working... in the event of a CUCM loss, the >>>>> call drops... >>>>> >>>>> Gateway is H.323... >>>>> >>>>> Any ideas how to remediate? >>>>> >>>>> >>>>> >>>>> Jonathan >>>>> >>>>> _______________________________________________ >>>>> cisco-voip mailing list >>>>> [email protected] >>>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>>> >>>>> >>>> >>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
