The limitation of call preservation has always been that both sides need to disconnect the call.
On Wed, Apr 30, 2014 at 10:39 PM, Jonathan Charles <[email protected]>wrote: > That fixed it, thanks! > > Downside is that the call doesn't disconnect when the remote > disconnects.... added limit-media-detection and it appears to not be any > better... > > > J > > > On Wed, Apr 30, 2014 at 3:25 PM, Jonathan Charles <[email protected]>wrote: > >> Made the changes; will need to schedule maintenance to test. >> >> >> On Wed, Apr 30, 2014 at 9:30 AM, Brian Meade <[email protected]> wrote: >> >>> Since you're using H.323, you need to set "Allow Peer to Preserve H.323 >>> Calls" to "True" under Service Parameters->Cisco CallManager. >>> >>> Brian >>> >>> >>> On Tue, Apr 29, 2014 at 11:16 PM, Jonathan Charles <[email protected]>wrote: >>> >>>> We have no hard phones; however, Cisco IP Communicator also drops the >>>> call during a CCM failover... >>>> >>>> >>>> Jonathan >>>> >>>> >>>> On Tue, Apr 29, 2014 at 10:08 AM, Brian Meade <[email protected]> wrote: >>>> >>>>> Jonathan, >>>>> >>>>> Have you tested the call preservation on a hard phone and confirmed >>>>> that is working okay first? >>>>> >>>>> Brian >>>>> >>>>> >>>>> On Tue, Apr 29, 2014 at 10:28 AM, Jonathan Charles <[email protected] >>>>> > wrote: >>>>> >>>>>> We have CUCM 9.1, IM&P 9 and Jabber 9.6 connected to IM and P as >>>>>> softphones... >>>>>> >>>>>> Call Preservation is not working... in the event of a CUCM loss, the >>>>>> call drops... >>>>>> >>>>>> Gateway is H.323... >>>>>> >>>>>> Any ideas how to remediate? >>>>>> >>>>>> >>>>>> >>>>>> Jonathan >>>>>> >>>>>> _______________________________________________ >>>>>> cisco-voip mailing list >>>>>> [email protected] >>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>>>> >>>>>> >>>>> >>>> >>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
