We have a UCCX in 10.5 ver and CUCM 10.5 with IP Phones 7841 for the agents. Their primary line is a personal line and the secondary button in their ICD line is a different partition with number of calls 2, busy trigger 1. Randomly the phones stop receiving calls from the CUCM even though they are in idle state and send a SIP "busy here" message to the CUCM. Since the call does not complete the UCCX sends the call to the same agent as it still is the longest idle in their queue causing the stuck in reserve state in that particular agent. After a cable disconnect to that phone the phone starts receiving calls again. We have a TAC case open but we want to know if someone has experienced this before. Any feedback or help will be appreciated.
Regards, Jose A. Robles Senior Network/Voice Consultant [cid:3F0B417B-C340-4002-9F96-E5909FECB300] CCNP, CCDP, CCNA-VOICE Netxar Technologies, Inc. - www.netxar.com<http://www.netxar.com> 17 Ponce Street San Juan, PR 00917 ph: +1 787 765 0058 x2015 fax: +1 787 756 5362 cel: +1 787 300 1245 email [email protected]<mailto:[email protected]> This communication and any files or attachments transmitted with it may contain information that is confidential, privileged and exempt from disclosure under applicable law. It is intended solely for the use of the individual or the entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any use, dissemination, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us at once so that we may take the appropriate action and avoid troubling you further. P BEFORE YOU PRINT this e-mail, think about your responsibility and commitment with the ENVIRONMENT
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
