9.x has the interleaved traces as well. On Fri, Jan 23, 2015 at 4:10 PM, Ryan Ratliff (rratliff) <[email protected] > wrote:
> For an SCCP phone you'll see a StationInit from CCM to the phone > instructing the phone to go OnHook. Using SDL traces you can follow that > back to where it originated from, which will likely be CTI if I recall how > RCC works correctly. > This tracking is much easier in 10.x with interleaved traces. > > -Ryan > > On Jan 23, 2015, at 6:55 AM, Jefflin Choi <[email protected]> wrote: > > All, > > We have lync remote call control integrated on our CCM/CUPS system. I'm > troubleshooting some call disconnect issues basically. > > Does anyone know which criteria to look for if it's caused by the lync RCC > on CCM and CUPS traces? > > If it's SIP phone, 9951 did saw one time with SIP REFER Message to the > phone to disconnect on CCM traces though not sure if this is also the case > with SCCP phones. > Softkey event does show me if it was an end call press but i don't think > this applies if it was triggered by closing the call dialog box on lync. > > What's the normal logging trace configuration that needs to be enabled > also? > > TIA, > Jeff > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
