I don't understand your question/concern. Both documents are saying the same thing: you can direct upgrade from 8.6(1).
On Thu, Mar 26, 2015 at 10:51 AM Nick <[email protected]> wrote: > Hi All > > Just checking through documentation for CUCM 10.5 for an upgrade, the > compatibility guide states that a direct upgrade is from 8.6.1 onwards as > shown below. > > Upgrade Paths for Cisco Unified Communications Manager Release 10.5(2)SU1 > > *Note* > ------------------------------ > If your release is not listed in the following table, find the upgrade > path from your current release to a listed release in Cisco Unified > Communications Manager Software Compatibility Matrix for Release 9.X and > Earlier at > http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf > <http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf>. > > ------------------------------ > Table 15 Export Restricted Supported Cisco Unified Communications Manager > Upgrades for Release 10.5(2)SU1 > > 10.5(2)SU1 > > 10.5.2.11900-3 > > Active > > February 24, 2015 > > Direct Upgrade: > > 10.5(2), 10.5(1)SU1a, 10.5(1)SU1, 10.5(1), 10.0(1)SU2, 10.0(1)SU1, > 10.0(1), 9.1(2)SU2a, 9.1(2)SU2, 9.1(2)SU1, 9.1(2), 9.1(1a), 9.1(1), 9.0(1), > > 8.6(2a)SU5, 8.6(2a)SU4a, 8.6(2a)SU4, 8.6(2a)SU3, 8.6(2a)SU2, 8.6(2a)SU1, > 8.6(2a), > > 8.6(2), 8.6(1a), 8.6(1) > > Supported: (Consult the Cisco Unified Communications Manager Upgrade Guide > for details) > > 8.5.(1)SU7, 8.5.(1)SU6, 8.5(1)SU5, 8.5(1)SU4, 8.5(1)SU3, 8.5(1)SU2, > > 8.5(1)SU1, 8.5(1), 8.0(3a)SU3, 8.0(3a)SU2, 8.0(3a)SU1, 8.0(3a), > > 8.0(3), 8.0(2c)SU1, 8.0(2c), 8.0(2b), 8.0(2a), 8.0(2), 8.0(1), > > 7.1(5b)SU6(restricted), 7.1(5b)SU5(restricted), 7.1(5b)SU4(restricted), > > 7.1(5b)SU3(restricted), 7.1(5b)SU2(restricted), 7.1(5b)(restricted), > > 7.1(5a)(restricted), 7.1(5)SU1a(restricted), 7.1(5)SU1(restricted), > > 7.1(5)(restricted), 7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a, > > 7.1(3a)SU1, 7.1(3a), 7.1(3), 6.1(5)SU3, 6.1(5)SU2, 6.1(5)SU1, > > 6.1(5), 6.1(4a)SU2, 6.1(4a), 6.1(4)SU1, 6.1(4) > > However in the Read Me notes for 10.5.2 Su1 it states the following > > > *Version and Description* > > This SU is a cumulative update that incorporates all of the fixes and > changes from Cisco Unified Communications Manager 10.5(2) along with > additional changes that are specific to this SU. > > *Note* > > You can only install this SU on Cisco Unified Communications Manager > Release 6.1(4x), 6.1(5x), 7.1(3x), 7.1(5x), 8.0(x), 8.5(1x), 8.6(x), > 9.0(x), 9.1(x), 10.0(1), 10.5(1), or 10.5(2) This SU will not install over > any 10.5(2)ES’s. Upgrades from 6x, 7x, 8.x, and 9.x need to be requested > via PUT (www.cisco.com/upgrade) to obtain the necessary license. This SU > should not be installed on a Business Edition 3000 server. > > I would normally always go with what is says in the compatibility matrix, > however my colleague has just done an upgrade albeit in a lab from 8.5.1 > direct to 10.5.2 SU1. > > Anyone know if he just got lucky or if that is now supported? > > Regards > > Nick > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
