10.5 is VM only, 8.6.1 usually was MCS hardware. To upgrade you will need to 8.6.1 upgrade to 9.1 on MCS. Then 9.1 MCS to VM, the upgrade 9.1 to 10.5(2)SU1.
Neal Haas From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Andrew Grech Sent: Friday, March 27, 2015 7:30 AM To: Nick Cc: Cisco VoIP Group Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5 Supported vs the system will upgrade are two different things. On 27/03/2015 1:51 AM, "Nick" <csv...@googlemail.com<mailto:csv...@googlemail.com>> wrote: Hi All Just checking through documentation for CUCM 10.5 for an upgrade, the compatibility guide states that a direct upgrade is from 8.6.1 onwards as shown below. Upgrade Paths for Cisco Unified Communications Manager Release 10.5(2)SU1 [http://www.cisco.com/c/dam/en/us/td/i/templates/note.gif] Note ________________________________ If your release is not listed in the following table, find the upgrade path from your current release to a listed release in Cisco Unified Communications Manager Software Compatibility Matrix for Release 9.X and Earlier at http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf<http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf>. ________________________________ Table 15 Export Restricted Supported Cisco Unified Communications Manager Upgrades for Release 10.5(2)SU1 10.5(2)SU1 10.5.2.11900-3 Active February 24, 2015 Direct Upgrade: 10.5(2), 10.5(1)SU1a, 10.5(1)SU1, 10.5(1), 10.0(1)SU2, 10.0(1)SU1, 10.0(1), 9.1(2)SU2a, 9.1(2)SU2, 9.1(2)SU1, 9.1(2), 9.1(1a), 9.1(1), 9.0(1), 8.6(2a)SU5, 8.6(2a)SU4a, 8.6(2a)SU4, 8.6(2a)SU3, 8.6(2a)SU2, 8.6(2a)SU1, 8.6(2a), 8.6(2), 8.6(1a), 8.6(1) Supported: (Consult the Cisco Unified Communications Manager Upgrade Guide for details) 8.5.(1)SU7, 8.5.(1)SU6, 8.5(1)SU5, 8.5(1)SU4, 8.5(1)SU3, 8.5(1)SU2, 8.5(1)SU1, 8.5(1), 8.0(3a)SU3, 8.0(3a)SU2, 8.0(3a)SU1, 8.0(3a), 8.0(3), 8.0(2c)SU1, 8.0(2c), 8.0(2b), 8.0(2a), 8.0(2), 8.0(1), 7.1(5b)SU6(restricted), 7.1(5b)SU5(restricted), 7.1(5b)SU4(restricted), 7.1(5b)SU3(restricted), 7.1(5b)SU2(restricted), 7.1(5b)(restricted), 7.1(5a)(restricted), 7.1(5)SU1a(restricted), 7.1(5)SU1(restricted), 7.1(5)(restricted), 7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a, 7.1(3a)SU1, 7.1(3a), 7.1(3), 6.1(5)SU3, 6.1(5)SU2, 6.1(5)SU1, 6.1(5), 6.1(4a)SU2, 6.1(4a), 6.1(4)SU1, 6.1(4) However in the Read Me notes for 10.5.2 Su1 it states the following Version and Description This SU is a cumulative update that incorporates all of the fixes and changes from Cisco Unified Communications Manager 10.5(2) along with additional changes that are specific to this SU. Note You can only install this SU on Cisco Unified Communications Manager Release 6.1(4x), 6.1(5x), 7.1(3x), 7.1(5x), 8.0(x), 8.5(1x), 8.6(x), 9.0(x), 9.1(x), 10.0(1), 10.5(1), or 10.5(2) This SU will not install over any 10.5(2)ES’s. Upgrades from 6x, 7x, 8.x, and 9.x need to be requested via PUT (www.cisco.com/upgrade<http://www.cisco.com/upgrade>) to obtain the necessary license. This SU should not be installed on a Business Edition 3000 server. I would normally always go with what is says in the compatibility matrix, however my colleague has just done an upgrade albeit in a lab from 8.5.1 direct to 10.5.2 SU1. Anyone know if he just got lucky or if that is now supported? Regards Nick _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
