Do you have any SDL Links going out of services? Are you clustering over a WAN?
Temp Fail could be the result of two devices registered to different nodes on an active call when the SDL Link (tcp 8002) between those nodes goes down. file view activelog syslog/CiscoSyslog HTH, — Adam From: Lisa Notarianni <[email protected]<mailto:[email protected]>> Date: Monday, March 30, 2015 at 4:48 PM To: Cisco List <[email protected]<mailto:[email protected]>> Subject: [cisco-voip] Temp Fail since upgrade A few weeks ago we upgraded Call Manager and Unity Connection from 8.6.2 to 10.5.1. We have experienced 2 intermittent outbound calling issues: 1. “Temp Fail” shows on phone display and only option on phone button is “End Call” 2. Outbound callers dial a number and hear nothing but notice the phone display says “Connected”. Caller cannot hear anything. Person they called cannot hear anything. ***These issues are only intermittent.*** We had no issues before the upgrade. Is anyone experiencing the similar issues? Thank you in advance. [LNsignatureFile]
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
