“Maybe an ability to leverage ISOs on VMWare datastores instead of from the PCD server. “
…check cisco.com later this week or early next week ☺ -- Adam From: cisco-voip [mailto:[email protected]] On Behalf Of Heim, Dennis Sent: Monday, March 30, 2015 9:16 AM To: Matthew Collins; Haas, Neal; 'Andrew Grech'; Nick Cc: Cisco VoIP Group Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5 PCD is a great tool for single-site installs or upgrades in a lab environment. Biggest limitation of PCD when multisites are involved, since it pushes all ISOs from the PCD server. Maybe an ability to leverage ISOs on VMWare datastores instead of from the PCD server. Dennis Heim | Emerging Technology Architect (Collaboration) World Wide Technology, Inc. | +1 314-212-1814 [twitter]<https://twitter.com/CollabSensei> [chat]<xmpp:[email protected]>[Phone]<tel:+13142121814>[video]<sip:[email protected]> "Innovation happens on project squared" -- http://www.projectsquared.com<http://www.projectsquared.com/> Click here to join me in my Collaboration Meeting Room<https://wwt.webex.com/meet/dennis.heim> From: cisco-voip [mailto:[email protected]] On Behalf Of Matthew Collins Sent: Monday, March 30, 2015 6:08 AM To: Haas, Neal; 'Andrew Grech'; Nick Cc: Cisco VoIP Group Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5 Just a note on this. I have just completed a direct Hardware 8.5 to VM 10.5 with network changes using Prime collaboration deployment. No Cop files need to be installed, No jump upgrades, No restoring from backup. Really was a simple process. If you haven’t used PCD I would strongly suggest taking a look next time you upgrade or install a new build. Regards Matthew Collins From: cisco-voip [mailto:[email protected]] On Behalf Of Haas, Neal Sent: 27 March 2015 14:41 To: 'Andrew Grech'; Nick Cc: Cisco VoIP Group Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5 10.5 is VM only, 8.6.1 usually was MCS hardware. To upgrade you will need to 8.6.1 upgrade to 9.1 on MCS. Then 9.1 MCS to VM, the upgrade 9.1 to 10.5(2)SU1. Neal Haas From: cisco-voip [mailto:[email protected]]<mailto:[mailto:[email protected]]> On Behalf Of Andrew Grech Sent: Friday, March 27, 2015 7:30 AM To: Nick Cc: Cisco VoIP Group Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5 Supported vs the system will upgrade are two different things. On 27/03/2015 1:51 AM, "Nick" <[email protected]<mailto:[email protected]>> wrote: Hi All Just checking through documentation for CUCM 10.5 for an upgrade, the compatibility guide states that a direct upgrade is from 8.6.1 onwards as shown below. Upgrade Paths for Cisco Unified Communications Manager Release 10.5(2)SU1 [http://www.cisco.com/c/dam/en/us/td/i/templates/note.gif] Note ________________________________ If your release is not listed in the following table, find the upgrade path from your current release to a listed release in Cisco Unified Communications Manager Software Compatibility Matrix for Release 9.X and Earlier at http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf<http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf>. ________________________________ Table 15 Export Restricted Supported Cisco Unified Communications Manager Upgrades for Release 10.5(2)SU1 10.5(2)SU1 10.5.2.11900-3 Active February 24, 2015 Direct Upgrade: 10.5(2), 10.5(1)SU1a, 10.5(1)SU1, 10.5(1), 10.0(1)SU2, 10.0(1)SU1, 10.0(1), 9.1(2)SU2a, 9.1(2)SU2, 9.1(2)SU1, 9.1(2), 9.1(1a), 9.1(1), 9.0(1), 8.6(2a)SU5, 8.6(2a)SU4a, 8.6(2a)SU4, 8.6(2a)SU3, 8.6(2a)SU2, 8.6(2a)SU1, 8.6(2a), 8.6(2), 8.6(1a), 8.6(1) Supported: (Consult the Cisco Unified Communications Manager Upgrade Guide for details) 8.5.(1)SU7, 8.5.(1)SU6, 8.5(1)SU5, 8.5(1)SU4, 8.5(1)SU3, 8.5(1)SU2, 8.5(1)SU1, 8.5(1), 8.0(3a)SU3, 8.0(3a)SU2, 8.0(3a)SU1, 8.0(3a), 8.0(3), 8.0(2c)SU1, 8.0(2c), 8.0(2b), 8.0(2a), 8.0(2), 8.0(1), 7.1(5b)SU6(restricted), 7.1(5b)SU5(restricted), 7.1(5b)SU4(restricted), 7.1(5b)SU3(restricted), 7.1(5b)SU2(restricted), 7.1(5b)(restricted), 7.1(5a)(restricted), 7.1(5)SU1a(restricted), 7.1(5)SU1(restricted), 7.1(5)(restricted), 7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a, 7.1(3a)SU1, 7.1(3a), 7.1(3), 6.1(5)SU3, 6.1(5)SU2, 6.1(5)SU1, 6.1(5), 6.1(4a)SU2, 6.1(4a), 6.1(4)SU1, 6.1(4) However in the Read Me notes for 10.5.2 Su1 it states the following Version and Description This SU is a cumulative update that incorporates all of the fixes and changes from Cisco Unified Communications Manager 10.5(2) along with additional changes that are specific to this SU. Note You can only install this SU on Cisco Unified Communications Manager Release 6.1(4x), 6.1(5x), 7.1(3x), 7.1(5x), 8.0(x), 8.5(1x), 8.6(x), 9.0(x), 9.1(x), 10.0(1), 10.5(1), or 10.5(2) This SU will not install over any 10.5(2)ES’s. Upgrades from 6x, 7x, 8.x, and 9.x need to be requested via PUT (www.cisco.com/upgrade<http://www.cisco.com/upgrade>) to obtain the necessary license. This SU should not be installed on a Business Edition 3000 server. I would normally always go with what is says in the compatibility matrix, however my colleague has just done an upgrade albeit in a lab from 8.5.1 direct to 10.5.2 SU1. Anyone know if he just got lucky or if that is now supported? Regards Nick _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
