Just make sure to check release notes before as well! http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Release_Notes/Release_Notes.html#reference_23E4C721B42E4B909ABE8ECA786F88BE
Cheers, Tim. From: James Buchanan [mailto:[email protected]] Sent: Friday, 12 June 2015 12:08 AM To: Ahmed Abd EL-Rahman Cc: Tim Smith; [email protected] Subject: Re: [cisco-voip] WebEx question Open a TAC case. It is post MR5. On 11 Jun 2015, at 7:46 AM, Ahmed Abd EL-Rahman <[email protected]<mailto:[email protected]>> wrote: Hi James, So I can go directly to MR5 with the hotfix you mentioned, but how I can get this hotfix if it is not published on Cisco.com<http://Cisco.com> ? Best Regards Ahmed Abd EL-Rahman Senior Network Engineer - KSA From: James Buchanan [mailto:[email protected]] Sent: Thursday, June 11, 2015 4:16 PM To: Ahmed Abd EL-Rahman Cc: Tim Smith; [email protected]<mailto:[email protected]> Subject: Re: [cisco-voip] WebEx question Hello, It would be cumulative. However, I went from MR2 to MR5, so I'm not sure about MR4. I would just get TAC to publish the hotfix for you with special file access. Thanks, James On Thu, Jun 11, 2015 at 9:10 AM, Ahmed Abd EL-Rahman <[email protected]<mailto:[email protected]>> wrote: Hi James, One question here, I assume that everything mentioned to be fixed in MR4 and earlier should be included in MR5, am I right ? isn’t it a cumulative updates each one has all previous fixes plus new fixes ?. Also based on your feedback is it better to install the MR4 instead of the MR5 ? Best Regards Ahmed Abd EL-Rahman Senior Network Engineer - KSA From: James Buchanan [mailto:[email protected]<mailto:[email protected]>] Sent: Thursday, June 11, 2015 3:53 PM To: Tim Smith Cc: Ahmed Abd EL-Rahman; [email protected]<mailto:[email protected]> Subject: Re: [cisco-voip] WebEx question Hello, MR5 will not fix the URL question. However, applied without the hot fix I mentioned it will break the mobile app because of a bug regarding certificates and how they are issued. Thanks, James On 11 Jun 2015, at 4:29 AM, Tim Smith <[email protected]<mailto:[email protected]>> wrote: Hi Ahmed, I think the difference is the PT tools invites use plain text only I guess it’s because you can’t embed the hyperlink in there.. I have not tried the short URL feature yet, but I believe it will replace that long URL yes. I don’t think it will replace it with “Join the meeting” I think it will just replace it with a shortened URL So it should be shorter and neater but not exactly like the web invites. Looks like we need to be careful of the issue James raised though. Cheers, Tim From: Ahmed Abd EL-Rahman [mailto:[email protected]] Sent: Thursday, 11 June 2015 7:01 PM To: James Buchanan; Tim Smith Cc: [email protected]<mailto:[email protected]> Subject: RE: [cisco-voip] WebEx question Hi James/Tim, Just to make sure we are on the same page, I have the major release of the CWMS 2.5 without any MR releases installed. Here is what I meant by my question, This is a snapshot of the invitation received for a meeting initiated from web (with short hyperlink): <image001.jpg> And here a snapshot of the invitation received for a meeting initiated from outlook client (with long URL): <image002.jpg> So coming to your suggestions, will the MR5 fix this issue ? and will make the outlook invitation looks neat like the web invitation ? also, James did the MR5 caused issues with mobile client access with you ? Many thanks for your kind support. Best Regards Ahmed Abd EL-Rahman Senior Network Engineer - KSA -----Original Message----- From: James Buchanan [mailto:[email protected]] Sent: Thursday, June 11, 2015 6:10 AM To: Tim Smith Cc: Ahmed Abd EL-Rahman; [email protected]<mailto:[email protected]> Subject: Re: [cisco-voip] WebEx question If you go to MR5 you will break the mobile app. Just found out from the BU the other day. There is a hot fix they can publish for you. > On 10 Jun 2015, at 8:55 PM, Tim Smith > <[email protected]<mailto:[email protected]>> wrote: > > Hi Ahmed, > > Check out 2.5 MR4 if you are not on it.. > > Short URL feature is there, you can get rid of all the long URL's > > Also if you are security conscious, MR5 has split certificates too. > > You should upgrade to MR5 anyway if you aren't already, there are a couple of > doozies fixed along the way :) > > Cheers, > > Tim > > -----Original Message----- > From: cisco-voip [mailto:[email protected]] On Behalf Of > Ahmed Abd EL-Rahman > Sent: Wednesday, 10 June 2015 9:41 AM > To: [email protected]<mailto:[email protected]> > Subject: [cisco-voip] WebEx question > > Hi Gents, > > I have WebEx (CWMS) 2.5 and it is working fine, I have just one strange note, > when a user created a meeting from outlook directly the invitation email sent > with the complete long url for the meeting while when create a meeting from > the webpage the meeting invitation email is sent with "join the meeting" > hyperlink without the long meeting url being revealed which should be the > case regardless from which way the meeting has been created. > So any ideas what could be the reason for that > > > > > > Best Regards > > Ahmed Abd EL-Rahman > Senior Network Engineer - BMB KSA > _______________________________________________ > cisco-voip mailing list > [email protected]<mailto:[email protected]> > https://puck.nether.net/mailman/listinfo/cisco-voip > _______________________________________________ > cisco-voip mailing list > [email protected]<mailto:[email protected]> > https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
