I am doing SCCP... so how should it be formed? On Mon, Jun 15, 2015 at 7:45 AM, Charles Goldsmith <[email protected]> wrote:
> Not with MGCP > > Sent via C=64 Mobile > > On Jun 15, 2015, at 12:09 AM, Jonathan Charles <[email protected]> wrote: > > So, for Domain Name, did you not specify the SKIGWXXXXXXX or just the last > 10 of the MAC? > > > Jonathan > > On Mon, Jun 15, 2015 at 12:00 AM, Charles Goldsmith <[email protected]> > wrote: > >> Jonathan, here is the csv I've used recently with a MGCP vg310. Just >> like a 224, I create the gateway template and setup the first port with a >> line template. >> >> I did this recently on a 10.5.2 system with no issues. >> >> Let me know if you have any questions. >> >> >> On Sun, Jun 14, 2015 at 10:58 PM, Jonathan Charles <[email protected]> >> wrote: >> >>> Tried BATing a VG310 in the same way we used to do a VG224 and it failed >>> like crazy...it installs the first one, then errors out saying the domain >>> name already exists... >>> >>> I used the BAT template with 10.5.2-11900 and used the tab for the >>> VG310s. >>> >>> I tried adding the VG310 first and not, each time it fails... or just >>> adds the first port 0... >>> >>> Any ideas? >>> >>> >>> Jonathan >>> >>> >>> >>> _______________________________________________ >>> cisco-voip mailing list >>> [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-voip >>> >>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
