All -
I have been lurking on this list for quite a while as I
continue to hone my collaboration skills.
CAVEAT: This is not a production system and is not for any
customer. This is my lab as I continue to try to learn.
CUCM v9
Desired endstate: Populate the Missed Calls with CUCM Native Presence / Speed
Dial information.
What I have configured:
2 phones, both 7962s. Both have a BLF/SD pointing to the
other. One DN is 3001 and the other DN is 3002. BLF/SDs work fine. Created a
single partition that holds all the phones PT_Internal and a single CSS that
holds the partition CSS_Internal. On each of the 7962s, I set the line
SUBSCRIBE CSS to CSS_Internal. Finally, I set the Enterprise Parameter "BLF
for Call Lists" to enabled.
However, if I go offhook on 3002 and dial itself, I see the BLF
light on 3001. If I don't answer the call and then I check the missed calls
for 3001, I expect to see an entry for 3002. However, nothing shows. If I go
offhook on 3002, call 3001, let it ring and do not answer, that missed call
shows up as it should.
My Directories are populated with information from when I park
calls, directed parks, but not the missed call tied to the BLF.
Is this the expected behavior? Am I expecting to see something
(this missed call from 3002) that should not be there by design?
Thanks,
Jeff
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
