Do you have the enterprise parameter "BLF for call lists" enabled?
From: cisco-voip [mailto:[email protected]] On Behalf Of Jeffrey Girard Sent: Tuesday, December 01, 2015 6:20 PM To: [email protected] Subject: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists All - I have been lurking on this list for quite a while as I continue to hone my collaboration skills. CAVEAT: This is not a production system and is not for any customer. This is my lab as I continue to try to learn. CUCM v9 Desired endstate: Populate the Missed Calls with CUCM Native Presence / Speed Dial information. What I have configured: 2 phones, both 7962s. Both have a BLF/SD pointing to the other. One DN is 3001 and the other DN is 3002. BLF/SDs work fine. Created a single partition that holds all the phones PT_Internal and a single CSS that holds the partition CSS_Internal. On each of the 7962s, I set the line SUBSCRIBE CSS to CSS_Internal. Finally, I set the Enterprise Parameter "BLF for Call Lists" to enabled. However, if I go offhook on 3002 and dial itself, I see the BLF light on 3001. If I don't answer the call and then I check the missed calls for 3001, I expect to see an entry for 3002. However, nothing shows. If I go offhook on 3002, call 3001, let it ring and do not answer, that missed call shows up as it should. My Directories are populated with information from when I park calls, directed parks, but not the missed call tied to the BLF. Is this the expected behavior? Am I expecting to see something (this missed call from 3002) that should not be there by design? Thanks, Jeff
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
