Technically phone proxy isn't supported on 8.x either. It ended support after 7.x and Phone VPN replaced it in 8.x. If you're just using 7940/60s and IP Communicator, it should work still though.
Do you have a mixed mode CUCM cluster now or just doing non-secure between the ASA and CUCM? You can check the Cluster Security Mode under System->Enterprise Parameters. You really will want to use Phone VPN or MRA with Expressway instead of Phone VPN though as it's not supported by TAC unless on CUCM 7.x. On Tue, Jul 5, 2016 at 5:05 AM, Abebe Amare <abu...@gmail.com> wrote: > I am on the planning process to migrate CUCM 8.5 cluster to 10.5(2) using > PCD simple migration to minimize any change. Since Phone Proxy is not > supported on CUCM 10.x, I am thinking to keep the 8.5 cluster but change > the IP address. My question is this: > > 1. Do I have to enroll the certificate from CUCM to ASA when I change the > IP address of CUCM 8.5? > 2. What are other alternative features to phone proxy? > > best regards, > > Abebe > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip