Hi Brian, The cluster is in non-secure mode. From the ASA side, it looks like I have to change only the CUCM address in the phone proxy configuration without downloading the Certificates again. Is my assumption correct?
regards, Abebe On Tue, Jul 5, 2016 at 10:55 PM, Erick Bergquist <erick...@gmail.com> wrote: > Yea, I stumbled across the ASA guide mentioning it when I was trying > to find something stating CUCM 8.6 and phone proxy wasn't supported. > > On Tue, Jul 5, 2016 at 12:17 PM, Brian Meade <bmead...@vt.edu> wrote: > > I'm not so sure that was supposed to be added in there. Phone proxy > never > > supported the security by default features of CUCM which is why it went > End > > of Support with 8.x along with Phone VPN being launched. It looks like a > > doc bug was made to add CUCM 8.0 support into the ASA config guide > recently- > > https://bst.cloudapps.cisco.com/bugsearch/bug/CSCto66376 > > > > Security By Default features were never added to the ASA code that I know > > of- https://bst.cloudapps.cisco.com/bugsearch/bug/CSCti62447 > > > > On Tue, Jul 5, 2016 at 1:19 PM, Erick Bergquist <erick...@gmail.com> > wrote: > >> > >> The ASA 9.x documentation has Call Manager 8.0.x listed in it's > >> configuration guide for phone proxy. Just went through this recently > >> working on a phone proxy issue. > >> > >> > >> On Tue, Jul 5, 2016 at 10:58 AM, Brian Meade <bmead...@vt.edu> wrote: > >> > Technically phone proxy isn't supported on 8.x either. It ended > support > >> > after 7.x and Phone VPN replaced it in 8.x. If you're just using > >> > 7940/60s > >> > and IP Communicator, it should work still though. > >> > > >> > Do you have a mixed mode CUCM cluster now or just doing non-secure > >> > between > >> > the ASA and CUCM? You can check the Cluster Security Mode under > >> > System->Enterprise Parameters. > >> > > >> > You really will want to use Phone VPN or MRA with Expressway instead > of > >> > Phone VPN though as it's not supported by TAC unless on CUCM 7.x. > >> > > >> > On Tue, Jul 5, 2016 at 5:05 AM, Abebe Amare <abu...@gmail.com> wrote: > >> >> > >> >> I am on the planning process to migrate CUCM 8.5 cluster to 10.5(2) > >> >> using > >> >> PCD simple migration to minimize any change. Since Phone Proxy is not > >> >> supported on CUCM 10.x, I am thinking to keep the 8.5 cluster but > >> >> change the > >> >> IP address. My question is this: > >> >> > >> >> 1. Do I have to enroll the certificate from CUCM to ASA when I change > >> >> the > >> >> IP address of CUCM 8.5? > >> >> 2. What are other alternative features to phone proxy? > >> >> > >> >> best regards, > >> >> > >> >> Abebe > >> >> > >> >> _______________________________________________ > >> >> cisco-voip mailing list > >> >> cisco-voip@puck.nether.net > >> >> https://puck.nether.net/mailman/listinfo/cisco-voip > >> >> > >> > > >> > > >> > _______________________________________________ > >> > cisco-voip mailing list > >> > cisco-voip@puck.nether.net > >> > https://puck.nether.net/mailman/listinfo/cisco-voip > >> > > > > > >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
