The ASA 9.x documentation has Call Manager 8.0.x listed in it's configuration guide for phone proxy. Just went through this recently working on a phone proxy issue.
On Tue, Jul 5, 2016 at 10:58 AM, Brian Meade <[email protected]> wrote: > Technically phone proxy isn't supported on 8.x either. It ended support > after 7.x and Phone VPN replaced it in 8.x. If you're just using 7940/60s > and IP Communicator, it should work still though. > > Do you have a mixed mode CUCM cluster now or just doing non-secure between > the ASA and CUCM? You can check the Cluster Security Mode under > System->Enterprise Parameters. > > You really will want to use Phone VPN or MRA with Expressway instead of > Phone VPN though as it's not supported by TAC unless on CUCM 7.x. > > On Tue, Jul 5, 2016 at 5:05 AM, Abebe Amare <[email protected]> wrote: >> >> I am on the planning process to migrate CUCM 8.5 cluster to 10.5(2) using >> PCD simple migration to minimize any change. Since Phone Proxy is not >> supported on CUCM 10.x, I am thinking to keep the 8.5 cluster but change the >> IP address. My question is this: >> >> 1. Do I have to enroll the certificate from CUCM to ASA when I change the >> IP address of CUCM 8.5? >> 2. What are other alternative features to phone proxy? >> >> best regards, >> >> Abebe >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
