We have ISE deployed and didn't find phone profiling to be 100% successful. We 
deployed LSCs to all our phones and use those for 802.1x authentication.

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Hendrix, Bill W. - US
Sent: 18 September 2016 11:52 AM
To: 'cisco-voip@puck.nether.net' <cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] dot1x multi domain phones prompt for login

We are also seeing the phones get disconnected with multi auth enabled and when 
computers are connected or disconnected from the phone PC port (docking 

From: Hendrix, Bill W. - US
Sent: Saturday, September 17, 2016 2:00 PM
To: 'cisco-voip@puck.nether.net'
Subject: dot1x multi domain phones prompt for login


  We have some ports where we applied multi-domain authentication on ports with 
Cisco phones connected for phone profiling.  We are using ISE.  However, the 
phones prompt for username and password.  Do the phones require any dot1x 
configuration to do this?  Or is this a setting in ISE causing this?

Bill Hendrix
The contents of this message may contain confidential and/or privileged 
subject matter. If this message has been received in error, please contact 
the sender and delete all copies. Like other forms of communication, 
e-mail communications may be vulnerable to interception by unauthorized 
parties. If you do not wish us to communicate with you by e-mail, please 
notify us at your earliest convenience. In the absence of such 
notification, your consent is assumed. Should you choose to allow us to 
communicate by e-mail, we will not take any additional security measures 
(such as encryption) unless specifically requested. 

If you no longer wish to receive commercial messages, you can unsubscribe 
by accessing this link:  http://www.bennettjones.com/unsubscribe
cisco-voip mailing list

Reply via email to