I’m looking at retrofitting our two sx20 quicksets with a minimum of a trc6 and hopefully with a touch10 panel. This all in an effort to support the clients getting a webex room kit which is using CE software.
I’ll need to upgrade the SX20 to the latest CE software once I get at least one of the two peripheral upgrades mentioned above. Just wondering if anyone has done this? A little confusion between the SX data sheet (updated March 2018) which refers to the CTS-CTRL-DVX-10 and a power injector (CTS-PWR-AIR-INJ5=) vs the Touch 10 data sheet (updated December 2017) which indicates the SX20 uses the CS-TOUCH10 model, with the CTS-CTRL-DV10 for IX series, and no mention of power injector. Data sheet references: https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-sx20-quick-set/data_sheet_c78-688342.html https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-touch/data_sheet_c78-646041.html -sent from mobile device- Lelio Fulgenzi, B.A. | Senior Analyst Computing and Communications Services | University of Guelph Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<x-apple-data-detectors://1/0> 519-824-4120 Ext. 56354<tel:519-824-4120;56354> | [email protected]<mailto:[email protected]> www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook [University of Guelph Cornerstone with Improve Life tagline]
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
