For SX20, you have to pair the Touch10 over the network. You can't attach it direct. There were originally some plans for a USB to Ethernet adapter for Touch10 but that got cancelled.
On Thu, Aug 30, 2018 at 2:22 PM Lelio Fulgenzi <[email protected]> wrote: > Thanks Jeremy… especially the part about the upgrades. I’m on the fence > about pushing them out from CUCM just now, especially with how few we have. > > > > I’d like both the TRC6 and the touch 10 in order to display the > differences between the two to the users who may have one. The Touch 10 is > quite a bit more expensive – I’m not sure I’m even going to get one, let > alone two. 😊 > > > > After what you mention, and reviewing the documentation though, I’m lost > on one piece… How the heck do I connect the touch 10 to the SX20? The SX20 > only has one network port. What am I missing here? > > > > --- > > *Lelio Fulgenzi, B.A.* | Senior Analyst > > Computing and Communications Services | University of Guelph > > Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | > N1G 2W1 > > 519-824-4120 Ext. 56354 | [email protected] > > > > www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook > > > > [image: University of Guelph Cornerstone with Improve Life tagline] > > > > *From:* cisco-voip <[email protected]> *On Behalf Of *Jeremy > Bresley > *Sent:* Thursday, August 30, 2018 1:44 PM > *To:* [email protected] > *Subject:* Re: [cisco-voip] Retrofitting sx20 quickset with trc6 and > touch10 panel > > > > On 8/30/18 13:15, Lelio Fulgenzi wrote: > > > I’m looking at retrofitting our two sx20 quicksets with a minimum of a > trc6 and hopefully with a touch10 panel. This all in an effort to support > the clients getting a webex room kit which is using CE software. > > > > I’ll need to upgrade the SX20 to the latest CE software once I get at > least one of the two peripheral upgrades mentioned above. > > > > Just wondering if anyone has done this? > > > > A little confusion between the SX data sheet (updated March 2018) which > refers to the CTS-CTRL-DVX-10 and a power injector (CTS-PWR-AIR-INJ5=) vs > the Touch 10 data sheet (updated December 2017) which indicates the SX20 > uses the CS-TOUCH10 model, with the CTS-CTRL-DV10 for IX series, and no > mention of power injector. > > > > Data sheet references: > > > > > https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-sx20-quick-set/data_sheet_c78-688342.html > > > > > https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-touch/data_sheet_c78-646041.html > > > > The CTS-CTRL-DVX-10 is the original model touch 10 (identifiable by the > USB ports on the side, and the plastic flap over the ethernet jack). This > is supported on all currently shipping endpoints including the IX. > > The CS-TOUCH10 is the new model which removed some of the hardware which > wasn't used (audio jack, USB ports) and simplified the ethernet jack on the > back (eliminated the flap which tended to break off). It also can be > identified by the Cisco logo on the bottom of the face and the foot stand > which folds completely flat (done to make wall mounting easier). This one > is only supported on the MX/SX/Room units. > > Power injector is required if you're using either one directly connected > to an SX or MX or a RoomKit (RoomKitPlus has PoE for the Touch10 > interface). Or you can connect it to a PoE switch and provide power that > way as well. If it's not directly connected to the endpoint, you will have > to give it the IP/admin credentials for the unit to connect to when you > install it. > > Also, if you have a Touch10, why bother with the TRC6? If I have a > Touch10, I'm doing everything from that instead of the remote. User > experience is MUCH better/simpler with the Touch10. > > One thing that confuses people with the newer CE code is there's no longer > a separate PKG file for standalone upgrades, you just upload the COP file > directly to the endpoint to upgrade it if you aren't pushing it from CUCM. > (Can also use the COP file from TMS if the units are VCS registered.) > > Jeremy > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
