On Mon, 17 Jul 2000, you wrote:
thanks for the attention,
correction for network layout :
x25 LL FR x25
POTS1 ---- 1750 ---- 4500 ---- 4500 ---- 4500 ---- 1750 ---- POTS2
can I configure the voice connection between both POTS but still use x25 for
data ? how to configure the routers ?
thanks.
Janto
> If you just want to 'bridge' analog phone service this is what you need
> - private line automatic ringdown (plar) means that the connection is
> established as soon as one end goes off the hook. This is a point to
> point config ... if you want to get fancier than this you need to create
> a dial plan.
>
> --- router one ---
>
> voice-port 1/0/0
> connection plar 194
> !
> !
> dial-peer voice 194 voip
> destination-pattern 194
> codec g711ulaw
> session target ipv4:x.x.x.241
> !
> !
> dial-peer voice 1 pots
> destination-pattern 167
> port 1/0/0
>
> --- router two ---
> voice-port 1/0/0
> connection plar 167
> !
> dial-peer voice 167 voip
> destination-pattern 167
> codec g711ulaw
> session target ipv4:x.x.x.245
>
> dial-peer voice 1 pots
> destination-pattern 194
> port 1/0/0
>
>
> [EMAIL PROTECTED] wrote:
>
> > hi all,
> >
> > here's the network layout
> >
> > x25 LL
> > FR x25
> > POTS 1 --- 1750 ------ 4500 ------ 4500 ------- 4500 ----------- 1750
> > ---- POTS 2
> >
> > how to setup the router for voice connection from both POTS ?
> > thank you very much.
> >
> > Best Regards,
> > JC
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
Best Regards,
Janto Cin
PT Datacomm Diangraha
Phone : 62-21-6303030 (Hunting)
Mobile : 62-812-9102542
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
