For a tftp upload to work the file must already exist in some form on the
tftp server.  TFTP does not have the ability to create new files.  If this
is a unix server, touch a file with the same filename as your IOS and make
sure it's writable by 'other'.  If it's Windows, create an empty text file
with the name of your IOS.  

HTH,
John

>>> Henager Jeff 6/16/03 8:28:00 AM >>>
I am able to copy flash from a 2505 to my tftp server, and I can copy the
running-config fine from the 2501 to the same tftp server, but when I try
to
copy the flash, this is what I get:
2501#copy flash tftp

System flash directory:
File  Length   Name/status
  1   9404512  rtr/c2500-js-l.113-5.T.bin
[9404576 bytes used, 7372640 available, 16777216 total]
Address or name of remote host [192.168.1.100]? 192.168.1.100
Source file name? rtr/c2500-js-l.113-5.T.bin
Destination file name [rtr/c2500-js-l.113-5.T.bin]?
Verifying checksum for 'rtr/c2500-js-l.113-5.T.bin' (file # 1)...  OK
Copy 'rtr/c2500-js-l.113-5.T.bin' from Flash to server
  as 'rtr/c2500-js-l.113-5.T.bin'? [yes/no]y
TFTP: error code 0 received - TFTP Error: Path not found

Copy aborted - TFTP timeout
2501# 
What could cause this? Here is some more information.
2501#sh flash all

System flash directory:
File  Length   Name/status
        addr      fcksum  ccksum
  1   9404512  rtr/c2500-js-l.113-5.T.bin
        0x40      0x5257  0x5257
[9404576 bytes used, 7372640 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)

   Chip    Bank    Code      Size      Name
    1      1       01AD      2048KB    AMD   29F016
    2      1       01AD      2048KB    AMD   29F016
    3      1       01AD      2048KB    AMD   29F016
    4      1       01AD      2048KB    AMD   29F016
    1      2       01AD      2048KB    AMD   29F016
    2      2       01AD      2048KB    AMD   29F016
    3      2       01AD      2048KB    AMD   29F016
    4      2       01AD      2048KB    AMD   29F016
Executing current image from System flash
2501# 
........end of output
Can I rename the falsh from rtr/c2500-js-l.113-5.T.bin to something else? I
think this is what is causing the problem, but since that is the name shown
by the 'sh flash' command, and trying to just use "c2500-js-l.113-5.T.bin"
hasn't worked.
Thanks to anyone who can help.
Jeff




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70726&t=70722
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to