I am able to copy flash from a 2505 to my tftp server, and I can copy the
running-config fine from the 2501 to the same tftp server, but when I try to
copy the flash, this is what I get:
2501#copy flash tftp
System flash directory:
File Length Name/status
1 9404512 rtr/c2500-js-l.113-5.T.bin
[9404576 bytes used, 7372640 available, 16777216 total]
Address or name of remote host [192.168.1.100]? 192.168.1.100
Source file name? rtr/c2500-js-l.113-5.T.bin
Destination file name [rtr/c2500-js-l.113-5.T.bin]?
Verifying checksum for 'rtr/c2500-js-l.113-5.T.bin' (file # 1)... OK
Copy 'rtr/c2500-js-l.113-5.T.bin' from Flash to server
as 'rtr/c2500-js-l.113-5.T.bin'? [yes/no]y
TFTP: error code 0 received - TFTP Error: Path not found
Copy aborted - TFTP timeout
2501#
What could cause this? Here is some more information.
2501#sh flash all
System flash directory:
File Length Name/status
addr fcksum ccksum
1 9404512 rtr/c2500-js-l.113-5.T.bin
0x40 0x5257 0x5257
[9404576 bytes used, 7372640 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
Chip Bank Code Size Name
1 1 01AD 2048KB AMD 29F016
2 1 01AD 2048KB AMD 29F016
3 1 01AD 2048KB AMD 29F016
4 1 01AD 2048KB AMD 29F016
1 2 01AD 2048KB AMD 29F016
2 2 01AD 2048KB AMD 29F016
3 2 01AD 2048KB AMD 29F016
4 2 01AD 2048KB AMD 29F016
Executing current image from System flash
2501#
.........end of output
Can I rename the falsh from rtr/c2500-js-l.113-5.T.bin to something else? I
think this is what is causing the problem, but since that is the name shown
by the 'sh flash' command, and trying to just use "c2500-js-l.113-5.T.bin"
hasn't worked.
Thanks to anyone who can help.
Jeff
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70722&t=70722
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
