Hi, I think the problem is that there is no "rtr" directory on the TFTP server. Either create that directory, or when the router asks for "Destination file name", type in something that doesn't have a directory name in it (e.g. "c2500-js-l.113-5.T.bin") instead of accepting the default "rtr/c2500-js-l.113-5.T.bin".
Thanks, Zsombor At 01:47 PM 6/16/2003 +0000, Henager Jeff wrote: >I am able to copy flash from a 2505 to my tftp server, and I can copy the >running-config fine from the 2501 to the same tftp server, but when I try to >copy the flash, this is what I get: >2501#copy flash tftp > >System flash directory: >File Length Name/status > 1 9404512 rtr/c2500-js-l.113-5.T.bin >[9404576 bytes used, 7372640 available, 16777216 total] >Address or name of remote host [192.168.1.100]? 192.168.1.100 >Source file name? rtr/c2500-js-l.113-5.T.bin >Destination file name [rtr/c2500-js-l.113-5.T.bin]? >Verifying checksum for 'rtr/c2500-js-l.113-5.T.bin' (file # 1)... OK >Copy 'rtr/c2500-js-l.113-5.T.bin' from Flash to server > as 'rtr/c2500-js-l.113-5.T.bin'? [yes/no]y >TFTP: error code 0 received - TFTP Error: Path not found > >Copy aborted - TFTP timeout >2501# >What could cause this? Here is some more information. >2501#sh flash all > >System flash directory: >File Length Name/status > addr fcksum ccksum > 1 9404512 rtr/c2500-js-l.113-5.T.bin > 0x40 0x5257 0x5257 >[9404576 bytes used, 7372640 available, 16777216 total] >16384K bytes of processor board System flash (Read ONLY) > > Chip Bank Code Size Name > 1 1 01AD 2048KB AMD 29F016 > 2 1 01AD 2048KB AMD 29F016 > 3 1 01AD 2048KB AMD 29F016 > 4 1 01AD 2048KB AMD 29F016 > 1 2 01AD 2048KB AMD 29F016 > 2 2 01AD 2048KB AMD 29F016 > 3 2 01AD 2048KB AMD 29F016 > 4 2 01AD 2048KB AMD 29F016 >Executing current image from System flash >2501# >.........end of output >Can I rename the falsh from rtr/c2500-js-l.113-5.T.bin to something else? I >think this is what is causing the problem, but since that is the name shown >by the 'sh flash' command, and trying to just use "c2500-js-l.113-5.T.bin" >hasn't worked. >Thanks to anyone who can help. >Jeff Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70728&t=70722 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
