Hello,

Please try debug ppp authentication and tell us the results.

Winston.

> -----Original Message-----
> From: Justin Vo [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, November 07, 2000 6:08 AM
> To:   [EMAIL PROTECTED]
> Subject:      ISDN call rejected
> 
> Hi,
> 
> My router keep rejecting ISDN calls even though I can dial out alright.
> It's
> a Cisco2500 series with an BRI0 interface.
> 
> This is my deb isdn q931. The configuration of my interface is also down
> below.
> 
> *****************************************************************
> Log Buffer (4096 bytes):
> Bearer Capability i = 0x8890
> 13w2d:         Channel ID i = 0x89
> 13w2d:         Facility i = 0x91A10E0201040201013006810103820101
> 13w2d:  - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d:         Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX ->  RELEASE_COMP pd = 8  callref = 0x9E
> 13w2d:         Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <-  SETUP pd = 8  callref = 0x1D
> 13w2d:         Sending Complete
> 13w2d:         Bearer Capability i = 0x8890
> 13w2d:         Channel ID i = 0x89
> 13w2d:         Facility i = 0x91A10E0201040201013006810103820101
> 13w2d:  - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d:         Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX ->  RELEASE_COMP pd = 8  callref = 0x9D
> 13w2d:         Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <-  SETUP pd = 8  callref = 0x1C
> 13w2d:         Sending Complete
> 13w2d:         Bearer Capability i = 0x8890
> 13w2d:         Channel ID i = 0x89
> 13w2d:         Facility i = 0x91A10E0201040201013006810103820101
> 13w2d:  - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d:         Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX ->  RELEASE_COMP pd = 8  callref = 0x9C
> 13w2d:         Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <-  SETUP pd = 8  callref = 0x1B
> 13w2d:         Sending Complete
> 13w2d:         Bearer Capability i = 0x8890
> 13w2d:         Channel ID i = 0x89
> 13w2d:         Facility i = 0x91A10E0201040201013006810103820101
> 13w2d:  - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d:         Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX ->  RELEASE_COMP pd = 8  callref = 0x9B
> 13w2d:         Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <-  SETUP pd = 8  callref = 0x1A
> 13w2d:         Sending Complete
> 13w2d:         Bearer Capability i = 0x8890
> 13w2d:         Channel ID i = 0x89
> 13w2d:         Facility i = 0x91A10E0201040201013006810103820101
> 13w2d:  - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d:         Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX ->  RELEASE_COMP pd = 8  callref = 0x9A
> 13w2d:         Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <-  SETUP pd = 8  callref = 0x19
> 13w2d:         Sending Complete
> 13w2d:         Bearer Capability i = 0x8890
> 13w2d:         Channel ID i = 0x89
> 13w2d:         Facility i = 0x91A10E0201040201013006810103820101
> 13w2d:  - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d:         Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX ->  RELEASE_COMP pd = 8  callref = 0x99
> 13w2d:         Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <-  SETUP pd = 8  callref = 0x18
> 13w2d:         Sending Complete
> 13w2d:         Bearer Capability i = 0x8890
> 13w2d:         Channel ID i = 0x89
> 13w2d:         Facility i = 0x91A10E0201040201013006810103820101
> 13w2d:  - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d:         Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX ->  RELEASE_COMP pd = 8  callref = 0x98
> 13w2d:         Cause i = 0x8095 - Call rejected
> Nov  7 11:33:24: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 106
> changed
> to down
> Nov  7 11:36:57: %LINK-5-CHANGED: Interface BRI0, changed state to
> administrativ
> ely down
> Nov  7 11:36:57: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> Nov  7 11:36:57: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
> ************************************************************
> interface BRI0
>  description OnRamp2 xxxx
>  no ip address
>  no ip directed-broadcast
>  dialer pool-member 1 max-link 1
>  isdn switch-type basic-net3
>  no cdp enable
> !
> interface Dialer1
>  description xxxxxxxxxx
>  ip address 203.2.130.37 255.255.255.252
>  ip access-group 102 in
>  no ip directed-broadcast
>  ip nat outside
>  encapsulation ppp
>  dialer remote-name WPCorp-rtr
>  dialer idle-timeout 60
>  dialer pool 1
>  dialer-group 1
>  no cdp enable
>  ppp authentication chap
> 
> 
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to