The process never get to ppp authentication hence a debug ppp authentication
does not show anything. Cisco suggested to removed the max-link 1 but yet
it's not help. Strange enough it works now. The only things I changed is the
isdn switch type from basic ts-013 to basic-net3 since Australia is using
Isdn switch type of Europe (which I think that's not the problem because I
tried to change that but it does not help) and I add the ppp encapsulation
and ppp authentication to BRI interface as well.
Now it works. I'm not 100% of the problem but it works now. Anyone can give
an explaination ?
Thanks again for all the suggestion.
Justin Vo
""David Armstrong"" <[EMAIL PROTECTED]> wrote in message
8up6vk$9i$[EMAIL PROTECTED]">news:8up6vk$9i$[EMAIL PROTECTED]...
> As Winston requested we need debug ppp authentication and a config from
the
> other router would help too. My guess is this is either a dialer map
problem
> or a password problem.
>
> David Armstrong
>
>
> ""Justin Vo"" <[EMAIL PROTECTED]> wrote in message
> 8u7vf9$k3f$[EMAIL PROTECTED]">news:8u7vf9$k3f$[EMAIL PROTECTED]...
> > Hi,
> >
> > My router keep rejecting ISDN calls even though I can dial out alright.
> It's
> > a Cisco2500 series with an BRI0 interface.
> >
> > This is my deb isdn q931. The configuration of my interface is also down
> > below.
> >
> > *****************************************************************
> > Log Buffer (4096 bytes):
> > Bearer Capability i = 0x8890
> > 13w2d: Channel ID i = 0x89
> > 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> > 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> > 13w2d: Called Party Number i = 0xC1, '93799467'
> > 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9E
> > 13w2d: Cause i = 0x8095 - Call rejected
> > 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1D
> > 13w2d: Sending Complete
> > 13w2d: Bearer Capability i = 0x8890
> > 13w2d: Channel ID i = 0x89
> > 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> > 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> > 13w2d: Called Party Number i = 0xC1, '93799467'
> > 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9D
> > 13w2d: Cause i = 0x8095 - Call rejected
> > 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1C
> > 13w2d: Sending Complete
> > 13w2d: Bearer Capability i = 0x8890
> > 13w2d: Channel ID i = 0x89
> > 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> > 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> > 13w2d: Called Party Number i = 0xC1, '93799467'
> > 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9C
> > 13w2d: Cause i = 0x8095 - Call rejected
> > 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1B
> > 13w2d: Sending Complete
> > 13w2d: Bearer Capability i = 0x8890
> > 13w2d: Channel ID i = 0x89
> > 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> > 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> > 13w2d: Called Party Number i = 0xC1, '93799467'
> > 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9B
> > 13w2d: Cause i = 0x8095 - Call rejected
> > 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1A
> > 13w2d: Sending Complete
> > 13w2d: Bearer Capability i = 0x8890
> > 13w2d: Channel ID i = 0x89
> > 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> > 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> > 13w2d: Called Party Number i = 0xC1, '93799467'
> > 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9A
> > 13w2d: Cause i = 0x8095 - Call rejected
> > 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x19
> > 13w2d: Sending Complete
> > 13w2d: Bearer Capability i = 0x8890
> > 13w2d: Channel ID i = 0x89
> > 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> > 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> > 13w2d: Called Party Number i = 0xC1, '93799467'
> > 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x99
> > 13w2d: Cause i = 0x8095 - Call rejected
> > 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x18
> > 13w2d: Sending Complete
> > 13w2d: Bearer Capability i = 0x8890
> > 13w2d: Channel ID i = 0x89
> > 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> > 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> > 13w2d: Called Party Number i = 0xC1, '93799467'
> > 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x98
> > 13w2d: Cause i = 0x8095 - Call rejected
> > Nov 7 11:33:24: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 106
> > changed
> > to down
> > Nov 7 11:36:57: %LINK-5-CHANGED: Interface BRI0, changed state to
> > administrativ
> > ely down
> > Nov 7 11:36:57: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> > Nov 7 11:36:57: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
> > ************************************************************
> > interface BRI0
> > description OnRamp2 xxxx
> > no ip address
> > no ip directed-broadcast
> > dialer pool-member 1 max-link 1
> > isdn switch-type basic-net3
> > no cdp enable
> > !
> > interface Dialer1
> > description xxxxxxxxxx
> > ip address 203.2.130.37 255.255.255.252
> > ip access-group 102 in
> > no ip directed-broadcast
> > ip nat outside
> > encapsulation ppp
> > dialer remote-name WPCorp-rtr
> > dialer idle-timeout 60
> > dialer pool 1
> > dialer-group 1
> > no cdp enable
> > ppp authentication chap
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
