As Winston requested we need debug ppp authentication and a config from the
other router would help too. My guess is this is either a dialer map problem
or a password problem.
David Armstrong
""Justin Vo"" <[EMAIL PROTECTED]> wrote in message
8u7vf9$k3f$[EMAIL PROTECTED]">news:8u7vf9$k3f$[EMAIL PROTECTED]...
> Hi,
>
> My router keep rejecting ISDN calls even though I can dial out alright.
It's
> a Cisco2500 series with an BRI0 interface.
>
> This is my deb isdn q931. The configuration of my interface is also down
> below.
>
> *****************************************************************
> Log Buffer (4096 bytes):
> Bearer Capability i = 0x8890
> 13w2d: Channel ID i = 0x89
> 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d: Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9E
> 13w2d: Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1D
> 13w2d: Sending Complete
> 13w2d: Bearer Capability i = 0x8890
> 13w2d: Channel ID i = 0x89
> 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d: Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9D
> 13w2d: Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1C
> 13w2d: Sending Complete
> 13w2d: Bearer Capability i = 0x8890
> 13w2d: Channel ID i = 0x89
> 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d: Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9C
> 13w2d: Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1B
> 13w2d: Sending Complete
> 13w2d: Bearer Capability i = 0x8890
> 13w2d: Channel ID i = 0x89
> 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d: Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9B
> 13w2d: Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x1A
> 13w2d: Sending Complete
> 13w2d: Bearer Capability i = 0x8890
> 13w2d: Channel ID i = 0x89
> 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d: Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x9A
> 13w2d: Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x19
> 13w2d: Sending Complete
> 13w2d: Bearer Capability i = 0x8890
> 13w2d: Channel ID i = 0x89
> 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d: Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x99
> 13w2d: Cause i = 0x8095 - Call rejected
> 13w2d: ISDN BR0: RX <- SETUP pd = 8 callref = 0x18
> 13w2d: Sending Complete
> 13w2d: Bearer Capability i = 0x8890
> 13w2d: Channel ID i = 0x89
> 13w2d: Facility i = 0x91A10E0201040201013006810103820101
> 13w2d: - ETSI Supplementary Service, Invoke, Unsupported operation
> 13w2d: Called Party Number i = 0xC1, '93799467'
> 13w2d: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x98
> 13w2d: Cause i = 0x8095 - Call rejected
> Nov 7 11:33:24: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 106
> changed
> to down
> Nov 7 11:36:57: %LINK-5-CHANGED: Interface BRI0, changed state to
> administrativ
> ely down
> Nov 7 11:36:57: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> Nov 7 11:36:57: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
> ************************************************************
> interface BRI0
> description OnRamp2 xxxx
> no ip address
> no ip directed-broadcast
> dialer pool-member 1 max-link 1
> isdn switch-type basic-net3
> no cdp enable
> !
> interface Dialer1
> description xxxxxxxxxx
> ip address 203.2.130.37 255.255.255.252
> ip access-group 102 in
> no ip directed-broadcast
> ip nat outside
> encapsulation ppp
> dialer remote-name WPCorp-rtr
> dialer idle-timeout 60
> dialer pool 1
> dialer-group 1
> no cdp enable
> ppp authentication chap
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
