They are, but they still has AD of 1. It can easily be proved.
Just enter 'debug ip routing' before you add static route
pointing to interface, and you will see that it will be added
into routing table with AD of 1.
Sasa
>
> Those routes are treated like directly-connected interfaces...
>
> Brant I. Stevens
> Internetwork Solutions Engineer
> Thrupoint, Inc.
> 545 Fifth Avenue, 14th Floor
> New York, NY. 10017
> 646-562-6540
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Sasa Milic
> Sent: Friday, February 02, 2001 5:49 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: Admin distance on directly connected
>
>
> >
> > A directly connected network has an AD=0.
> > A static route via Interface has AD=0
> > A static route via IP address has AD=1 Correct?
>
> A static route via interface cannot have AD of 0.
> It can have AD from 1 (default) to 255, just like
> any other static route.
>
> Sasa
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
