Dave,
It sounds like your switches are configured for bridge groups rather than VLANS. This
can be reset by going to the Main Menu and selecting S (System Sub-Menu). Then select
option T (Reset to VLANS) to enable VLAN configuration. Option T changes to Reset to
Bridge Groups when VLANS are enabled.
HTH,
Tom Lisa, Instructor, CCNA, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
[EMAIL PROTECTED] wrote:
> I have 2 Cat1900 switches (WS-1912-A). One has the 8.01.00 Standard Edition
> loaded and the other has the 9.00.04 Enterprise Edition loaded. On neither
> of them are any of the VLAN commands available.
>
> The Cisco ICND book covers VLANs on Cat1900 switches and a co-worker just
> attended a GlobalKnowledge CCNA Boot Camp where they did configure VLANs on
> Cat1900s (with version 8.xx loaded).
>
> In addition to the software version, is there a hardware issue? Do some
> Cat1900s not support VLANs?
>
> Dave Goldsmith
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
