Conf t, set an IP on your Ethernet interface & try TFTP-ing the image again.
You've got a decent command line with the boot code in this router.
Phil
----- Original Message -----
From: "Jason Baker" <[EMAIL PROTECTED]>
To: "'Niraj Palikhey'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 5:57 AM
Subject: RE: 2514 Upgrade Problem!!
> sounds like a job for xmodem and a few hours of your time worrying if the
> power will go off:).
>
>
>
> -----Original Message-----
> From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, March 27, 2001 3:45 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: 2514 Upgrade Problem!!
>
>
> Hi,
> When I was upgrading the IOS on a 2514 router via tftp, the connection was
> lost while the router was trying to download the new ios from the tftp
> server(after having erased the existing ios!!). The router retried a
couple
> of times and I was finally forced to reboot the router. The routers now
> boots to the mini-ios(gives me the Router(boot)> prompt. What can I do to
> successfully upgrade the ios on this router.
> Thank you for your help.
> Regards,
> [EMAIL PROTECTED]
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
