the ether port is the key issue, if tftp server is reached via ether
thatll work, if u need to go over the serial port to get to the tftp
server, crash bomb fail..
Bri
On Tue, 27 Mar 2001, John Neiberger wrote:
> If I remember correctly, in that mode on a 2500 series router, routing
> is disabled. If your TFTP server is not directly attached to the
> ethernet port then you need to set a default gateway using the "ip
> default-gateway" command to provide connectivity to the network. If you
> can ping your TFTP server from the router you should be able to try the
> upgrade again.
>
> HTH,
> John
>
> >>> "Niraj Palikhey" <[EMAIL PROTECTED]> 3/26/01 10:44:58 PM >>>
> Hi,
> When I was upgrading the IOS on a 2514 router via tftp, the connection
> was
> lost while the router was trying to download the new ios from the tftp
>
> server(after having erased the existing ios!!). The router retried a
> couple
> of times and I was finally forced to reboot the router. The routers now
>
> boots to the mini-ios(gives me the Router(boot)> prompt. What can I do
> to
> successfully upgrade the ios on this router.
> Thank you for your help.
> Regards,
> [EMAIL PROTECTED]
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
