Ok here is my question, Say you setup DDR with analog lines back to a
central location with PRI, would you need to have the MICA modems or is
there a command that will let the PRI interface card use the lines from the
t1-PRI? I've search the CCO and I've found a lot of information on DDR but
nothing on the specifics for coming back into a central PRI.
Lost in DDR land
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1701&t=1701
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
