We have several remote sites that need to dial-in if there frame relay
connection fails, I figured I would set them up with modems hooked to the
aux port as a backup interface. My questions revolves around the central
site with the PRI. I've been told my another NA that I work with that there
is a command that you can enter that will allow you to use the dial-in lines
directly on the router without using MICA modems. I thought a modem had to
talk to another modem. Hope this helps. What kind of setup did you do and
did it work successfully?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 24, 2001 9:49 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: DDR into a PRI [7:1701]
I'm confused give me more information! I just setup a T1-PRI with Mica
modems.
-----Original Message-----
From: Robert Fowler [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 24, 2001 9:32 AM
To: [EMAIL PROTECTED]
Subject: DDR into a PRI [7:1701]
Ok here is my question, Say you setup DDR with analog lines back to a
central location with PRI, would you need to have the MICA modems or is
there a command that will let the PRI interface card use the lines from the
t1-PRI? I've search the CCO and I've found a lot of information on DDR but
nothing on the specifics for coming back into a central PRI.
Lost in DDR land
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1703&t=1701
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
