Type Show log and see if you see your output there. If not, then try
logging monitor debug
Good Luck,
Let me know if it works,
Ejay
-----Original Message-----
From: cisco guru [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 19, 2001 1:09 AM
To: [EMAIL PROTECTED]
Subject: Debug not working via telnet [7:9019]
Hi all,
I am trying to see the debug output on my routers via telnet sessions but am
not having any luck. I first got the debug ip packet command to work but
then it stopped working. No other debug commands will work. Eg. debug ip
igrp trans
I have the service timestamps commands issued along with the term mon
command on the router running the telnet session.
The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make
a difference or does something in particular have to be done on both
routers?
Please advise.
Thank you.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9055&t=9019
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
