If you have two telnet sessions, the output of the debug will be display to
the first telnet session...Christophe
>From: "Robert Hosford"
>Reply-To: "Robert Hosford"
>To: [EMAIL PROTECTED]
>Subject: Re: Debug not working via telnet [7:9019]
>Date: Tue, 26 Jun 2001 14:19:24 -0400
>
>Logging syncronous will affect it as well.
>
>
>----- Original Message -----
>From: "G30RG3"
>To:
>Sent: Wednesday, June 20, 2001 3:59 PM
>Subject: Re: Debug not working via telnet [7:9019]
>
>
> > Make sure you input the command terminal monitor so it will display the
> > output to the VTY session you are logged in on. otherwise it will only
>show
> > it to the console session.
> >
> > Good Luck
> >
> > George, Head Janitor, CCNA CCDA
> > Cisco Systems
> >
> > ""cisco guru"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi all,
> > > I am trying to see the debug output on my routers via telnet sessions
>but
> > am
> > > not having any luck. I first got the debug ip packet command to work
>but
> > > then it stopped working. No other debug commands will work. Eg. debug
>ip
> > > igrp trans
> > > I have the service timestamps commands issued along with the term mon
> > > command on the router running the telnet session.
> > > The ios ver. on this particular router is 11.0 (10c). Does the ios
>ver.
> > make
> > > a difference or does something in particular have to be done on both
> > > routers?
> > > Please advise.
> > > Thank you.
> > > _________________________________________________________________
> > > Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10099&t=9019
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
