Make sure you input the command terminal monitor so it will display the
output to the VTY session you are logged in on. otherwise it will only show
it to the console session.
Good Luck
George, Head Janitor, CCNA CCDA
Cisco Systems
""cisco guru"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
> I am trying to see the debug output on my routers via telnet sessions but
am
> not having any luck. I first got the debug ip packet command to work but
> then it stopped working. No other debug commands will work. Eg. debug ip
> igrp trans
> I have the service timestamps commands issued along with the term mon
> command on the router running the telnet session.
> The ios ver. on this particular router is 11.0 (10c). Does the ios ver.
make
> a difference or does something in particular have to be done on both
> routers?
> Please advise.
> Thank you.
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9245&t=9019
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
