So Can I use them or not??
""EA Louie"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Here goes a simple question that will help me out a lot from now one.. > > I just bought the following equipments from a company that ran out of > > business: > > > > 4 2511 > > 3 AS2511RJ > > 1 2501 > > 3 catalyst 1200 (older than my grandma!!!) > > Your grandma is only 9 years old? ;-) of course, the 'Crescendo' 1200 was > 2 generations of switch ago... > > > > > I heard that the IOS of the 1200 is similar to the 5000 , that is much > more > > expensive!! > > > > All of them are running 11.x and has 8MB flash > > > > I have got most of those cables like the octal (2 of them) and I have to > get > > some back to back cables. > > I am working towards my CCNP and future CCIE and I would like to know what > > else should I buy to make > > my lab or labs up and running. And how much would that cost to me??. > > > > You might want one more router with 4 or more serial interfaces so you can > simulate a frame relay network. A 2521, 2523, or Cisco 4000 with an NP-4T, > and you could conceivably get one of either for $500. A little more flash > wouldn't hurt you either - 8 8M flash simms would be great (crack the cases > to see if the routers have an open flash SIMM slot because your 8M flash > could be made up of 2 4M flash SIMMs) > > > I also would like to setup a lab where people could telnet in .. > > If you set up one terminal server that is accessible via the Internet and > connect the async interfaces to the console ports of the other routers, > you'll have that handled. > > > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23900&t=23836 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
