Thanks John, I will have to market now 8mb flash memory, any idea how much do they cost?? About selling all of them and getting 2501's , I will increase the number of routers and maybe I can have 2 of them... I am getting more stuffs like the 7000 series ...I just have to test all the boards and market them..I don;t think it is a good idea to have them installed in a lab.. As far as Switch goes which is the best cost/benefit to have some of them..
Thanks, Alex ""John Neiberger"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sure, why not? You may want to upgrade to 16M flash and a version of > 12.1 for the IOS. A very important thing to remember--which I learned > the hard way last night--is that you may need to upgrade your boot roms > to allow the router to accept more memory. In my case, I had 10.2(5) > boot roms and they won't accept AMD 8M flash sticks. I need, at > minimum, 10.2(7a). Apparently, Cisco will send you new boot roms for > free as long as you pay shipping. Somewhere in the archives is the > phone number to call for this. > > You may also want to get a token ring MAU and two routers with token > ring interfaces. You'll need these more for CCIE studies. > > HTH, > John > > >>> "Alexandre Carvalho" 10/23/01 > 8:39:00 AM >>> > So Can I use them or not?? > > > ""EA Louie"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Here goes a simple question that will help me out a lot from now > one.. > > > I just bought the following equipments from a company that ran out > of > > > business: > > > > > > 4 2511 > > > 3 AS2511RJ > > > 1 2501 > > > 3 catalyst 1200 (older than my grandma!!!) > > > > Your grandma is only 9 years old? ;-) of course, the 'Crescendo' > 1200 > was > > 2 generations of switch ago... > > > > > > > > I heard that the IOS of the 1200 is similar to the 5000 , that is > much > > more > > > expensive!! > > > > > > All of them are running 11.x and has 8MB flash > > > > > > I have got most of those cables like the octal (2 of them) and I > have to > > get > > > some back to back cables. > > > I am working towards my CCNP and future CCIE and I would like to > know > what > > > else should I buy to make > > > my lab or labs up and running. And how much would that cost to > me??. > > > > > > > You might want one more router with 4 or more serial interfaces so > you can > > simulate a frame relay network. A 2521, 2523, or Cisco 4000 with an > NP-4T, > > and you could conceivably get one of either for $500. A little more > flash > > wouldn't hurt you either - 8 8M flash simms would be great (crack > the > cases > > to see if the routers have an open flash SIMM slot because your 8M > flash > > could be made up of 2 4M flash SIMMs) > > > > > I also would like to setup a lab where people could telnet in .. > > > > If you set up one terminal server that is accessible via the Internet > and > > connect the async interfaces to the console ports of the other > routers, > > you'll have that handled. > > > > > > > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23911&t=23836 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
