comments below: -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of khramov Sent: Monday, November 12, 2001 4:51 PM To: [EMAIL PROTECTED] Subject: ospf config [7:26034]
I am sorry for a stupid question. I am trying to set up an OSPF network. So far I am doing from a router to a router . Here is what I have: Router A: int e0/0 ip address 192.168.30.0 255.255.255.0 <<== IP address is not correct - your IOS accepted this? ip ospf network poin-to-point <<=== mis-spelled - the IOS should reject this network ospf 10 network 192.168.0.0 0.0.255.255.0.0 area 0 <<=== your inverse mask in not correct - how did the IOS EVER accept this? Router B: int e0/0 ip address 192.168.31.0 255.255.255.0 <<== IP address is incorrect ip ospf network point-to-point network ospf 10 network 192.168.0.0 0.0.255.255 area 0 When I do sh dcp neigh I can see the router but I can not ping it. Would you please tell me what I am doing wrong. Thanks in advance, CL - in addition, both your ethernet addressees are in different subnets? you say you can see the other router? how? CDP? [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26042&t=26034 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
