:-) I said: "here is a sample config:" Modify to your needs, and try it first before. I said the wildcard mask is: 0.0.255.255, is correct to the network 192.168.0.0 (/16) 192.168.0.0 0.0.255.255, and all the interfaces that belong to that network belongs to the OSPF process. Try with: #sh ip ospf interface You have to put some adicional commands, (like ip ospf cost, area 0 authentication, etc. if you want). Read first : www.cisco.com and search: OSPF Bye.
-- Oscar ----- Original Message ----- From: "Angry Packet" To: Sent: Monday, November 12, 2001 9:32 PM Subject: Re: ospf config [7:26034] > Oscar, > You're fired too. This config won't work either. > > So this Cisco test question would be: If Oscar gave > you this config to put in your router, you would? > > A. Just trust him and paste it in. > > B. Change the IP addresses to be on the same IP > subnet. > > C. Change the OSPF wildcard mask to 0.0.0.255. > > D. Fire Oscar. > > E. B and D > > Your Friend, > Angry Packet > > ""Oscar Valdez"" wrote: > > > You have a lot of errors, here is a sample config: > > > > Router A: > > int eth0/0 > > ip address 192.168.30.1 255.255.255.0 > > ! > > router ospf 10 > > log-adjacency-changes > > network 192.168.0.0 0.0.255.255 area 0 > > > > Router B: > > int eth0/0 > > ip address 192.168.31.1 255.255.255.0 > > ! > > router ospf 10 > > log-adjacency-changes > > network 192.168.0.0 0.0.255.255 area 0 > > ! > > > > -- > > Oscar > > > > ----- Original Message ----- > > From: "khramov" > > To: > > Sent: Monday, November 12, 2001 7:50 PM > > Subject: ospf config [7:26034] > > > > > > > I am sorry for a stupid question. > > > I am trying to set up an OSPF network. So far I > am doing from a router > > > to a router . > > > Here is what I have: > > > > > > Router A: > > > int e0/0 > > > ip address 192.168.30.0 255.255.255.0 ip ospf > network poin-to-point > > > network ospf 10 network 192.168.0.0 > 0.0.255.255.0.0 area 0 > > > > > > Router B: > > > int e0/0 > > > ip address 192.168.31.0 255.255.255.0 ip ospf > network point-to-point > > > network ospf 10 network 192.168.0.0 0.0.255.255 > area 0 > > > > > > When I do sh dcp neigh I can see the router but I > can not ping it. > > > Would you please tell me what I am doing wrong. > > > > > > Thanks in advance, > > > > > > [GroupStudy.com removed an attachment of type > text/x-vcard which had a > > name > > > of khramov.vcf] > [EMAIL PROTECTED] > > > > __________________________________________________ > Do You Yahoo!? > Find a job, post your resume. > http://careers.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26056&t=26034 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
