This is the configuration I have in all 17204s. As you can see, I am using GTS, but is not working, it is not limiting to 64 or 32.
interface Serial1 description WII-Enlace-Sebaco bandwidth 256 no ip address no ip directed-broadcast encapsulation frame-relay IETF no keepalive no fair-queue ! interface Serial1.1 multipoint description MP-Sebaco ip address 132.1.21.1 255.255.255.0 no ip directed-broadcast no arp frame-relay frame-relay map ip 132.1.21.2 515 frame-relay map ip 132.1.21.3 519 frame-relay map ip 132.1.21.4 523 ! interface Serial1.2 point-to-point bandwidth 64 ip unnumbered FastEthernet0 no ip directed-broadcast no arp frame-relay traffic-shape rate 64000 8000 8000 1000 no cdp enable frame-relay interface-dlci 516 ! interface Serial1.3 point-to-point bandwidth 64 ip unnumbered FastEthernet0 no ip directed-broadcast no arp frame-relay traffic-shape rate 32000 8000 8000 1000 no cdp enable frame-relay interface-dlci 520 Regards, Joseba Izaga ----- Original Message ----- From: "mike" To: "Joseba Izaga" ; Sent: Tuesday, January 15, 2002 6:17 PM Subject: Re: Traffic-rate shape [7:32072] > It should work using 12.0 on a 1720 router. We use 12.0.7T on our 1720s, > and traffic shape using map-classes and priority queueing > > What does your config look like, what commands are you using to verify > traffic shaping is/isn't on? > > > ----- Original Message ----- > From: "Joseba Izaga" > To: > Sent: Tuesday, January 15, 2002 7:38 PM > Subject: Re: Traffic-rate shape [7:32072] > > > > I already did a frame-relay traffic shaping and limit with CIR, but did > not > > function. > > > > What else can I do instead of upgrading the IOS? > > > > ----- Original Message ----- > > From: "Steven A. Ridder" > > To: > > Sent: Tuesday, January 15, 2002 2:22 PM > > Subject: Re: Traffic-rate shape [7:32072] > > > > > > > Try upgrading the IOS or do CBWFQ or frame-relay traffic shaping and > limit > > > with CIR. Create a map class and add map class to subinterface. > > > > > > > > > ""Joseba Izaga"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > Hi, > > > > > > > > I have a 1720 with 2 WIC-1T. I have 2 frame-relay radiomodem connected > > to > > > > each > > > > port. Each port has 2 sub-interfaces. > > > > > > > > What I need is to limit the bandwidth on the sub-interface to 64k. > > > > > > > > Right now I am using the command traffic-rate shape 64000 on a CISCO > > 2620 > > > and > > > > it is working good, but not on the 1720. > > > > > > > > The 1720 has 12.0 IOS version. > > > > > > > > So, why the 1720 is not limiting the bandwitdh? > > > > > > > > Or, there is another way to limit the bandwitdh? > > > > > > > > Regards, > > > > > > > > Joseba Izaga Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32154&t=32072 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
