hi.... it seems ok to me as there is packets on the "stats" command but,
i need to ask this....sorry. you said before that it is not working ,but how do you know it`s not working ???...i feel i am bieng a bit thick and missing something... cheers steve >From: "Joseba Izaga" >To: "steve skinner" , >Subject: Re: Traffic-rate shape [7:32072] >Date: Wed, 16 Jan 2002 10:07:23 -0800 > >Steve, > >This is what I got > >Router#show traffic-shape statistics > Access Queue Packets Bytes Packets >Bytes Shaping >I/F List Depth Delayed Delayed >Active >Se1.2 0 289 45537 0 >0 no >Se1.3 0 36573 5751328 114 >63246 no >Router# > >Also, > >Router#sh traffic-shape serial 1.2 > Access Target Byte Sustain Excess >Interval Increment Adapt >I/F List Rate Limit bits/int bits/int >(ms) (bytes) Active >Se1.2 64000 2000 8000 8000 125 >1000 - > >Router#sh traffic-shape serial 1.3 > Access Target Byte Sustain Excess >Interval Increment Adapt >I/F List Rate Limit bits/int bits/int >(ms) (bytes) Active >Se1.3 32000 2000 8000 8000 250 >1000 - > >So, what do you think? > >Joseba Izaga > >----- Original Message ----- >From: "steve skinner" >To: >Sent: Wednesday, January 16, 2002 7:17 AM >Subject: Re: Traffic-rate shape [7:32072] > > > > hi ... > > > > if you do a "show traffic-shape" what does the "byte limit" count say >for > > each VC.... > > > > also what does > > > > show traffic-shape stats ...say > > > > hth > > > > steve > > > > > > >From: "Joseba Izaga" > > >Reply-To: "Joseba Izaga" > > >To: [EMAIL PROTECTED] > > >Subject: Re: Traffic-rate shape [7:32072] > > >Date: Wed, 16 Jan 2002 09:08:16 -0500 > > > > > >This is the configuration I have in all 17204s. As you can see, I am >using > > >GTS, but is not working, it is not limiting to 64 or 32. > > > > > >interface Serial1 > > > description WII-Enlace-Sebaco > > > bandwidth 256 > > > no ip address > > > no ip directed-broadcast > > > encapsulation frame-relay IETF > > > no keepalive > > > no fair-queue > > >! > > >interface Serial1.1 multipoint > > > description MP-Sebaco > > > ip address 132.1.21.1 255.255.255.0 > > > no ip directed-broadcast > > > no arp frame-relay > > > frame-relay map ip 132.1.21.2 515 > > > frame-relay map ip 132.1.21.3 519 > > > frame-relay map ip 132.1.21.4 523 > > >! > > >interface Serial1.2 point-to-point > > > bandwidth 64 > > > ip unnumbered FastEthernet0 > > > no ip directed-broadcast > > > no arp frame-relay > > > traffic-shape rate 64000 8000 8000 1000 > > > no cdp enable > > > frame-relay interface-dlci 516 > > >! > > >interface Serial1.3 point-to-point > > > bandwidth 64 > > > ip unnumbered FastEthernet0 > > > no ip directed-broadcast > > > no arp frame-relay > > > traffic-shape rate 32000 8000 8000 1000 > > > no cdp enable > > > frame-relay interface-dlci 520 > > > > > >Regards, > > > > > >Joseba Izaga > > > > > >----- Original Message ----- > > >From: "mike" > > >To: "Joseba Izaga" ; > > >Sent: Tuesday, January 15, 2002 6:17 PM > > >Subject: Re: Traffic-rate shape [7:32072] > > > > > > > > > > It should work using 12.0 on a 1720 router. We use 12.0.7T on our > > >1720s, > > > > and traffic shape using map-classes and priority queueing > > > > > > > > What does your config look like, what commands are you using to >verify > > > > traffic shaping is/isn't on? > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Joseba Izaga" > > > > To: > > > > Sent: Tuesday, January 15, 2002 7:38 PM > > > > Subject: Re: Traffic-rate shape [7:32072] > > > > > > > > > > > > > I already did a frame-relay traffic shaping and limit with CIR, >but > > >did > > > > not > > > > > function. > > > > > > > > > > What else can I do instead of upgrading the IOS? > > > > > > > > > > ----- Original Message ----- > > > > > From: "Steven A. Ridder" > > > > > To: > > > > > Sent: Tuesday, January 15, 2002 2:22 PM > > > > > Subject: Re: Traffic-rate shape [7:32072] > > > > > > > > > > > > > > > > Try upgrading the IOS or do CBWFQ or frame-relay traffic shaping >and > > > > limit > > > > > > with CIR. Create a map class and add map class to subinterface. > > > > > > > > > > > > > > > > > > ""Joseba Izaga"" wrote in message > > > > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > > > > Hi, > > > > > > > > > > > > > > I have a 1720 with 2 WIC-1T. I have 2 frame-relay radiomodem > > >connected > > > > > to > > > > > > > each > > > > > > > port. Each port has 2 sub-interfaces. > > > > > > > > > > > > > > What I need is to limit the bandwidth on the sub-interface to >64k. > > > > > > > > > > > > > > Right now I am using the command traffic-rate shape 64000 on a > > >CISCO > > > > > 2620 > > > > > > and > > > > > > > it is working good, but not on the 1720. > > > > > > > > > > > > > > The 1720 has 12.0 IOS version. > > > > > > > > > > > > > > So, why the 1720 is not limiting the bandwitdh? > > > > > > > > > > > > > > Or, there is another way to limit the bandwitdh? > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > Joseba Izaga > > _________________________________________________________________ > > Get your FREE download of MSN Explorer at >http://explorer.msn.com/intl.asp. _________________________________________________________________ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32181&t=32072 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
