And here's the show port I forgot!!
(enable) sh port 2/26
Port Name Status Vlan Duplex Speed Type
----- ------------------ ---------- ---------- ------ ----- ------------
2/26 Temp Driver server connected 990 full 100 10/100BaseTX
Port AuxiliaryVlan AuxVlan-Status InlinePowered PowerAllocated
Admin Oper Detected mWatt mA @42V
----- ------------- -------------- ----- ------ -------- ----- --------
2/26 none none - - - - -
Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex
----- -------- --------- ------------- -------- -------- -------- -------
2/26 disabled shutdown 0 0 1 disabled 51
Port Num-Addr Secure-Src-Addr Age-Left Last-Src-Addr
Shutdown/Time-Left
----- -------- ----------------- -------- ----------------- ----------------
--
2/26
- - - - -
Port Broadcast-Limit Broadcast-Drop
-------- --------------- --------------------
2/26 - 0
Port Send FlowControl Receive FlowControl RxPause TxPause Unsupported
admin oper admin oper opcodes
----- -------- -------- -------- -------- ------- ------- -----------
2/26 off off off off 0 0 0
Port Status Channel Admin Ch
Mode Group Id
----- ---------- -------------------- ----- -----
2/26 connected auto silent 68 0
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
----- ---------- ---------- ---------- ---------- ---------
2/26 154661 138931 0 0 6246
Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants
----- ---------- ---------- ---------- ---------- --------- --------- ------
---
2/26 0 0 0 0 0 30531
1
Port Last-Time-Cleared
----- --------------------------
""Patrick Donlon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Everyone
>
> I trying to find some information on some Ethernet errors that I see on a
> port, see the text below. The machine is an RS6000 and was experiencing
> some
> performance problems, the NIC was set to auto negotiation and there were
> the
> usual errors. The port and NIC are now both fixed and the errors are
> increasing steadily, I've had a good search on the CCO but I can't find
any
> explanation of what causes the errors, any advice will be appreciated
>
> Regards
>
> Patrick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33689&t=33687
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
