You appear to have the inline power module for ip phones. I had a problem once on a server where I disabled the power on the port and this resolved the errors.
C6509> (enable) set port inlinepower 2/26 off Dave Patrick Donlon wrote: > > And here's the show port I forgot!! > > (enable) sh port 2/26 > Port Name Status Vlan Duplex Speed Type > ----- ------------------ ---------- ---------- ------ ----- ------------ > 2/26 Temp Driver server connected 990 full 100 10/100BaseTX > > Port AuxiliaryVlan AuxVlan-Status InlinePowered PowerAllocated > Admin Oper Detected mWatt mA @42V > ----- ------------- -------------- ----- ------ -------- ----- -------- > 2/26 none none - - - - - > > Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex > ----- -------- --------- ------------- -------- -------- -------- ------- > 2/26 disabled shutdown 0 0 1 disabled 51 > > Port Num-Addr Secure-Src-Addr Age-Left Last-Src-Addr > Shutdown/Time-Left > ----- -------- ----------------- -------- ----------------- ---------------- > -- > 2/26 > - - - - - > > Port Broadcast-Limit Broadcast-Drop > -------- --------------- -------------------- > 2/26 - 0 > > Port Send FlowControl Receive FlowControl RxPause TxPause Unsupported > admin oper admin oper opcodes > ----- -------- -------- -------- -------- ------- ------- ----------- > 2/26 off off off off 0 0 0 > > Port Status Channel Admin Ch > Mode Group Id > ----- ---------- -------------------- ----- ----- > 2/26 connected auto silent 68 0 > > Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize > ----- ---------- ---------- ---------- ---------- --------- > 2/26 154661 138931 0 0 6246 > > Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants > ----- ---------- ---------- ---------- ---------- --------- --------- ------ > --- > 2/26 0 0 0 0 0 30531 > 1 > > Port Last-Time-Cleared > ----- -------------------------- > ""Patrick Donlon"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi Everyone > > > > I trying to find some information on some Ethernet errors that I see on a > > port, see the text below. The machine is an RS6000 and was experiencing > > some > > performance problems, the NIC was set to auto negotiation and there were > > the > > usual errors. The port and NIC are now both fixed and the errors are > > increasing steadily, I've had a good search on the CCO but I can't find > any > > explanation of what causes the errors, any advice will be appreciated > > > > Regards > > > > Patrick -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33702&t=33687 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
