Dave tried that one first as I thought it was the most interesting, but sadly
(enable) set port inline 2/26 off Feature not supported on module 2. I'll go back to basics first Ole. Thanks for the replies Pat ""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > You appear to have the inline power module for ip phones. I had a > problem once on a server where I disabled the power on the port and this > resolved the errors. > > C6509> (enable) set port inlinepower 2/26 off > > Dave > > Patrick Donlon wrote: > > > > And here's the show port I forgot!! > > > > (enable) sh port 2/26 > > Port Name Status Vlan Duplex Speed Type > > ----- ------------------ ---------- ---------- ------ ----- ------------ > > 2/26 Temp Driver server connected 990 full 100 10/100BaseTX > > > > Port AuxiliaryVlan AuxVlan-Status InlinePowered PowerAllocated > > Admin Oper Detected mWatt mA @42V > > ----- ------------- -------------- ----- ------ -------- ----- -------- > > 2/26 none none - - - - - > > > > Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex > > ----- -------- --------- ------------- -------- -------- -------- ------- > > 2/26 disabled shutdown 0 0 1 disabled 51 > > > > Port Num-Addr Secure-Src-Addr Age-Left Last-Src-Addr > > Shutdown/Time-Left > > ----- -------- ----------------- -------- ----------------- > ---------------- > > -- > > 2/26 > > - - - - - > > > > Port Broadcast-Limit Broadcast-Drop > > -------- --------------- -------------------- > > 2/26 - 0 > > > > Port Send FlowControl Receive FlowControl RxPause TxPause > Unsupported > > admin oper admin oper opcodes > > ----- -------- -------- -------- -------- ------- ------- > ----------- > > 2/26 off off off off 0 0 0 > > > > Port Status Channel Admin Ch > > Mode Group Id > > ----- ---------- -------------------- ----- ----- > > 2/26 connected auto silent 68 0 > > > > Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize > > ----- ---------- ---------- ---------- ---------- --------- > > 2/26 154661 138931 0 0 6246 > > > > Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts > Giants > > ----- ---------- ---------- ---------- ---------- --------- --------- > ------ > > --- > > 2/26 0 0 0 0 0 30531 > > 1 > > > > Port Last-Time-Cleared > > ----- -------------------------- > > ""Patrick Donlon"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi Everyone > > > > > > I trying to find some information on some Ethernet errors that I see on > a > > > port, see the text below. The machine is an RS6000 and was experiencing > > > some > > > performance problems, the NIC was set to auto negotiation and there were > > > the > > > usual errors. The port and NIC are now both fixed and the errors are > > > increasing steadily, I've had a good search on the CCO but I can't find > > any > > > explanation of what causes the errors, any advice will be appreciated > > > > > > Regards > > > > > > Patrick > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33707&t=33687 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
